The amount of power a house is expected to deliver has changed considerably over the past couple of decades. Homes that once ran a handful of circuits now support home offices, EV chargers, high-draw appliances, and air conditioning loads that push older panels hard. Five Pines Electrical handles that work in Snellville, from routine repairs and outlet replacements to full service upgrades and whole-home rewiring. Same-day service is often available, and licensed electricians handle every job.
Snellville is a town with a real mix of housing, from older neighborhoods where the wiring has never been touched to newer construction that still needs circuits added or panels expanded. Businesses, property owners, and homeowners all run into electrical problems that need proper diagnosis before any work starts. We cover it all, and the scope of the electrical work is priced before it starts. Call (943) 292-6289 to get a quote.
When you call, the first thing we do is talk through what you are dealing with. A simple outlet replacement and a full panel upgrade are priced differently, and what changes a quote is usually the scope of the job: how much wiring needs to run, whether the panel has capacity, whether permits apply to the work, and what we find once we get a look at the existing system.
We do not quote a flat rate before we understand the job, because the job determines the price. What you get on the call is a clear explanation of what the work involves and what it will cost before anything is scheduled. You can ask what the rate covers and get a straight answer. Pricing is confirmed before we start, not after.
If the work turns out to be more involved than the initial call suggested, we explain that before continuing. Clear communication from the first call to the final test is how every job runs here.
Homes built in earlier eras were wired for the loads of that time. Knob-and-tube wiring, which runs unsheathed conductors through ceramic insulators, is still found in some of the older properties in this area. It was not inherently unsafe when it was installed, but it lacks a ground, it was never designed for modern loads, and insulation that has aged for decades is not the same as insulation that is intact. Knob-and-tube replacement is one of the jobs we handle when a homeowner or landlord wants the wiring brought up to current standards.
Aluminum branch-circuit wiring shows up in homes from a later period. It expands and contracts differently than copper, which causes connections to loosen over time. Loose aluminum connections are a fire risk. We handle aluminum wiring remediation, which involves treating or replacing the connections at outlets, switches, and fixtures throughout the home.
Not every older home needs a full rewire. Some properties have had circuits updated over the years, and copper wiring in good condition with proper grounding and bonding does not need to be replaced just because the house is old. What matters is whether the wiring is safe, whether the panel can carry the load, and whether arc-fault and ground-fault breakers are in place where code requires them. We assess what is there and explain what needs attention and what does not.
Electrical problems do not always show up at a convenient time. A breaker that will not reset, an outlet that is warm to the touch, or a smell near the panel are situations that need attention promptly. We are available every day from 6:00 AM to 11:00 PM, and same-day service is often available for calls that cannot be put off.
When you call, we ask the right questions to understand what you are dealing with and find a time that works. If the problem points to something urgent, we say so on the call.
Rental properties and occupied homes present their own scheduling considerations. Electrical work that requires power to be cut to part of the house needs to be timed so it does not leave a tenant without power longer than necessary. We work around those constraints when we schedule, and we confirm the appointment window when you book so everyone involved can plan accordingly. Every job gets treated like it matters, because it does.
Recessed lighting and LED retrofits are among the most common installation calls we get. The work involves more than swapping a fixture: proper box placement, correct trim sizing, and making sure the circuit can carry the load without running a new feed. We handle the wiring and the installation together, so the result is clean and code-compliant.
The storm season across this region brings real outages, and a generator that is not properly wired is not a solution. A transfer switch isolates the home from the utility grid before the generator connects, which protects the equipment and keeps utility workers safe. We install the transfer switch and handle the generator wiring. The electrical side of the hookup is done to code, and we walk through how the system works before we leave.
Running power to a detached structure is a job that involves more than pulling a wire. The circuit needs to be sized correctly, the wiring method has to suit the run, and grounding at the sub-panel or disconnect at the structure has to be done properly. Electric gate operators have their own requirements. We handle the circuit installation from the main panel to the structure, including any trenching coordination the run requires.
Replacing a fixture is straightforward. Putting in a new one where there was no fixture before involves running wiring, installing the right box, and making sure the circuit is protected correctly. We handle both, along with dimmer installation, ceiling fan wiring, and switch replacements. Reach out and we will get it diagnosed.
Intermittent problems are the hardest to diagnose because the fault is not always present when someone shows up to look at it. A breaker that trips only under certain conditions, a light that flickers only at certain times of day, or an outlet that works sometimes and not others all require proper troubleshooting rather than a guess. We trace the circuit, check the connections, and find the actual cause before recommending a fix. We get to the bottom of the problem fast.
Most calls start with something that stopped working or started behaving strangely. A dead outlet, a tripped breaker that will not hold, a light fixture that flickers without explanation. These calls require a diagnostic visit before anything else, because the visible symptom is not always where the problem lives. We check the circuit, the connections, and the panel before recommending any work.
A panel upgrade call usually comes from one of a few situations: a panel that trips repeatedly under normal load, a home that is adding an EV charger or a high-draw appliance the current panel cannot support, or a fuse box that has simply run out of room. We handle service-entrance and meter upgrades alongside panel replacements when the full service needs to be brought up to current capacity. The full breakdown of what each upgrade involves is on the service page.
Installation work covers a wide range of jobs: outlets added to a room that does not have enough, a dedicated circuit for a new appliance, surge protection installed at the panel, or a complete circuit installation for a garage or addition. Each one starts with a look at what the panel can support before any new load is added. We confirm the scope and the price before the work begins, and the service page carries the full breakdown of what each type of installation involves.
our wiring guide covers the parts people usually ask about.
We cover Snellville and the communities around it throughout Gwinnett County. That includes Grayson, Loganville, Lilburn, Mountain Park, and Lawrenceville, along with the neighborhoods and unincorporated areas in between. If you are not sure whether we reach your address, call and ask. Scheduling is straightforward, and we work to find a time that fits.
Licensed electricians. Code-compliant wiring. Fair rates.
The calls we see most frequently involve panels that are undersized for the loads being put on them, wiring in older homes that has never been updated, and circuits that need to be added for new appliances or EV chargers. Fault finding is also common, particularly in homes where an intermittent problem has been going on for a while without a clear cause. Call (943) 292-6289 and we will talk through what you are dealing with.
Most electrical work leaves very little mess. Outlet and switch replacements, panel work, and fixture installations involve no wall opening at all. Running new wiring through finished walls sometimes requires small access holes, which we keep as minimal as the route allows. We clean up the work area before leaving, though patching and painting any openings is typically handled by the homeowner or a separate contractor.
Yes. We schedule rental property work and occupied-home jobs regularly, and we time the work to minimize how long power needs to be off to any part of the house. If you manage a rental and need an inspection, a repair, or a circuit added between tenants, call (943) 292-6289 and we will work out a schedule that fits the situation.
It can, because older homes sometimes have wiring or panel configurations that add to the scope of the job. Knob-and-tube wiring, aluminum branch circuits, or a panel that has been modified over the years can all affect what a repair or upgrade involves. We assess what is there during the visit and explain the scope before any work starts, so you know what you are committing to.
We trace circuits by hand using a circuit tracer and by testing outlets and fixtures directly. It takes more time than working from drawings, but it gives us an accurate picture of what is actually in the walls rather than what someone recorded years ago. We document what we find as part of the job so you have a clearer record going forward.
The electrical side is ours. We run the dedicated circuit, install the disconnect, and handle any panel work needed to support the load. The heating or cooling equipment itself, the unit, the refrigerant, the ductwork, is handled by an HVAC contractor. If your new system needs a circuit or a panel upgrade to support it, call us and we will take care of the electrical portion.
The method depends on the property layout, the distance involved, and what the applicable code requires for that type of installation. Underground runs in conduit are common for permanent installations, but there are situations where an aerial run is permitted. We look at the specific conditions at the property and explain what the options are before any work begins.
We start with a load calculation to see how much capacity the panel is currently using and how much headroom is left. We also look at the condition of the panel itself, the breaker ratings, and whether the service entrance is sized to support the additional draw. That review happens before any new circuit or appliance connection is scheduled.
We work alongside contractors handling cabinetry, plumbing, and tile when the project requires it. The electrical rough-in typically happens before walls close, and the finish work, fixtures, outlets, and switches, comes in after surfaces are done. We confirm the sequence with whoever is managing the renovation so the electrical stages line up with the rest of the work.
Whether it is a fault that has been chasing you for months or a panel that is finally out of room, Five Pines Electrical is available every day from 6:00 AM to 11:00 PM. Fast turnaround. Fair pricing. Safe results.
Call (943) 292-6289 for a quote on any electrical job in Snellville or anywhere across the surrounding area.
Everywhere else we go is in our service area. Close by, we also work in: Tucker, Duluth, Suwanee, Stonecrest.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps homes and businesses in Snellville running safely. The rows below cover every service we offer, who each one fits best, and what is practical to know before you call. Work is carried out by licensed electricians, and the scope is priced before anything is scheduled. Browse what applies to your situation, then call us to talk through the details.
| Service Type | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs, 240-volt and 220-volt outlet installation, Garage and workshop wiring, Basement circuit installation | Homeowners adding capacity or setting up a dedicated workspace | Every new circuit is sized for its intended load and connected at the panel with the correct breaker. |
| Whole-Home Surge Protection | Panel-level surge protector installation, Whole-house voltage spike protection, Protection for appliances and electronics, Surge protection for HVAC circuits | Homeowners in storm-prone areas or anyone with sensitive electronics | Gwinnett County sees active summer storm seasons with frequent lightning. A panel-mounted surge protector covers the entire home, not just the outlets with a strip plugged in. |
| Older-Home Rewiring | Aluminum wiring remediation, Knob-and-tube removal and replacement, Whole-home rewiring, Grounding and bonding upgrades | Owners of pre-1980 homes with outdated or unsafe wiring | Aluminum branch-circuit wiring and knob-and-tube systems were not built for modern electrical loads. A rewire brings the home up to current code and removes the safety risks that come with outdated wiring. |
| Dedicated Appliance Circuits | Dryer and range outlet installation, Refrigerator and dishwasher circuits, Microwave and washer circuits, Load calculations for new appliances | Kitchens and laundry rooms getting new or upgraded appliances | Running a high-draw appliance on a shared circuit is a common cause of repeated breaker trips. A dedicated circuit fixes that at the source. |
| Basement & Sump-Pump Circuits | Basement outlet and lighting circuits, Dedicated sump pump circuit, GFCI protection in below-grade spaces, Basement workshop wiring | Homeowners finishing a basement or protecting against water damage | A sump pump on a shared circuit is a risk during a storm outage. A dedicated circuit with proper GFCI protection is the right setup for below-grade equipment. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Panel replacement, Meter and service entrance upgrades | Older homes with undersized panels or anyone adding significant electrical load | A 100-amp panel that worked fine decades ago often cannot keep up with today's appliances, EV chargers, and home office equipment. A 200-amp upgrade resolves the capacity problem and supports what you actually need. |
| Breaker & Fuse Repair | Breaker replacement, AFCI and arc-fault breaker installation, Fuse box troubleshooting, Breaker panel repairs | Homes with breakers that trip repeatedly or fail to reset | A breaker that keeps tripping under normal load is often a sign of an undersized circuit or a failing breaker, not just a nuisance. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Tripping breakers, Circuit diagnosis | Homeowners and tenants dealing with an immediate electrical problem | A proper diagnosis comes first so you know exactly what the repair involves before any work begins. |
| Lighting Installation | Recessed and LED lighting, Pendant and chandelier installation, Under-cabinet lighting, Exterior and security lighting | Homeowners remodeling or anyone replacing outdated fixtures | We handle the wiring and the fixture, so the job is complete in one visit rather than requiring a separate electrician follow-up. |
| Ceiling Fan Installation | New fan installation, Wiring a new ceiling location, Fan control and switch setup, Fan replacement | Homeowners adding comfort or replacing an old fan | If there is no existing wiring at the ceiling location, we run the circuit and install the correct box before mounting the fan. |
| Outlet & Switch Installation | GFCI outlet installation, USB outlet installation, Dimmer switch installation, Standard outlet and switch replacement | Homeowners upgrading interiors or landlords bringing rental units up to code | GFCI protection is code-required in kitchens, bathrooms, garages, and outdoor areas, and older homes frequently lack it. |
| Wiring for Additions & Remodels | Electrical rough-in for new additions, Remodel wiring and circuit updates, Inspection-ready wiring at each stage, Load calculations for expanded spaces | Homeowners adding square footage or renovating existing rooms | Getting the electrical rough-in right from the start means the project passes inspections at each stage without delays. |
| Backup Generator Installation | Transfer switch installation, Standby generator wiring, Whole-home generator hookup, Generator circuit setup | Homeowners and businesses that need power during outages | A proper transfer switch isolates your home from the utility grid before the generator connects, which is both a safety requirement and a code requirement in Georgia. |
| Electrical Safety Inspections | Pre-purchase wiring inspections, Pre-renovation code checks, Rental unit inspections, Panel and outlet condition review | Homebuyers, landlords, and property managers | An inspection before closing or before a renovation starts gives you a clear picture of the wiring before you commit to the next step. |
| EV Charger Installation | Level 2 charger circuit installation, 240-volt outlet for EV charging, Panel capacity check, Commercial EV circuit installation | Homeowners and businesses adding electric vehicle charging | A Level 2 charger runs on a dedicated 240-volt circuit. We check panel capacity first and handle any upgrade needed before running the circuit to your garage or driveway. |
Every situation is a little different, so call us at (943) 292-6289 and we will walk through what the work involves and what it will cost before anything is scheduled.
(943) 292-6289