Planning an addition, finishing a basement, or bringing in a new appliance that needs its own circuit? Getting the electrical side right before the drywall goes up or the equipment arrives saves time and avoids the kind of rework that turns a straightforward project into a longer one. Five Pines Electrical handles the full range of residential and commercial electrical work in Tucker, and the scope of every job is confirmed before anything is scheduled.
Whether the call comes from a homeowner updating a kitchen, a landlord preparing a rental unit, or a business adding circuits for new equipment, the process is the same: a clear look at what the job involves, a price before the work starts, and licensed electricians handling the installation from start to finish. Call (943) 292-6289 to talk through what you need.
Getting your power back is easier than you think, and same-day service is often available for calls that cannot wait. When you call, we discuss the situation, confirm the scope, and find a time that fits. For a property that needs to stay open or a tenant who cannot be without power for long, we work around those constraints when we schedule.
For urgent calls, including a breaker that will not reset, a burning smell near an outlet, or a panel that has stopped behaving normally, we treat those differently from a planned installation. Call (943) 292-6289 and describe what you are seeing. We will tell you how quickly we can get there and what to do in the meantime.
We are available every day from 6:00 AM to 11:00 PM, so there is a real scheduling window even on weekends. Reach out and we will get it diagnosed.
Properties in this part of DeKalb County vary considerably in how they are laid out. A panel tucked into a finished basement, mounted in a detached garage, or sitting behind a utility closet door is not unusual, and knowing where it is before the electrician arrives saves time on both ends. When you call, we ask about access so the visit starts on the right foot.
Clear access to the panel matters more than most people realize. A few minutes spent moving storage away from the panel door, confirming the garage is unlocked, or locating the meter on the exterior can make a real difference in how quickly the work moves. We walk through what to have ready when you schedule, so the visit runs as smoothly as possible.
Every job gets treated like it matters, because it does.
The electrical jobs we take in Tucker cover a wide range, from a single outlet that stopped working to a full service upgrade for a home that has outgrown its original capacity. Below is a look at the specific job types that come up regularly and what each one actually involves.
An outlet that works sometimes, a breaker that trips under a load it should handle, or a light that flickers without an obvious cause all point to something that needs a proper diagnosis rather than a guess. We trace the problem to its source, whether that is a loose connection, a failing breaker, or a wiring issue deeper in the circuit, and explain what the fix involves before any work begins. Work is carried out by licensed electricians, and the diagnostic is part of the job, not an afterthought.
A new refrigerator, a chest freezer, a hot tub, or a table saw all draw enough current that sharing a circuit with other loads creates problems. We run dedicated circuits sized for the appliance or equipment, confirm the panel has the capacity to support the added load, and install the correct outlet or connection point. For workshop equipment in a garage or outbuilding, we handle the circuit from the panel out to the space.
Homes that were wired for a lighter electrical load than what they carry today often show the strain in repeated breaker trips, dimming lights when large appliances run, or a panel that simply has no room for additional circuits. A service upgrade to a higher amperage gives the home the headroom it needs. We run a load calculation, handle the service-entrance and meter work, and size the new panel for what the property actually needs, including room for future additions.
Stairways, hallways, and large rooms often need lights controlled from more than one location. Three-way and multi-location switching is a wiring job that looks simple from the switch plate but requires careful work behind the wall. We handle new installations and replacements, including smart switch configurations where the homeowner wants app or voice control.
Properties in and around Tucker that rely on a well pump or run an irrigation system need circuits dedicated to that equipment, properly sized and protected. We install and service the dedicated circuits that feed this kind of load, including the disconnect and protection required by code. If the existing wiring to a pump or irrigation controller is aging or undersized, we assess it and explain the options.
A detached garage or workshop that needs more than one or two circuits is a strong candidate for a subpanel rather than individual runs back to the main panel. A subpanel fed from the main gives the outbuilding its own breaker space, makes future additions straightforward, and keeps the wiring tidy. We handle the subpanel installation, the feeder run, and the grounding and bonding that goes with it.
Electrical work is priced based on what the job actually involves. A straightforward outlet replacement and a service upgrade to a higher amperage are different conversations, and the quote for each reflects the scope, the materials, and the access conditions at the property. We confirm the price before anything is scheduled so you know what you are committing to.
What changes a quote is usually one of a few things: whether the panel needs work before a circuit can be added, whether wiring runs through finished walls or open framing, and whether the job turns up a code issue that needs to be addressed as part of the work. We explain any of those clearly on the call or during the diagnostic visit. The scope of the electrical work is priced before it starts, and you can ask what the rate covers and get a straight answer.
Doing electrical work right matters, and we will help you get it right, whether the call is a quick repair or a larger installation. The kind of work a property needs depends heavily on what the property is and how it was built.
Older homes in Tucker sometimes carry wiring that was installed under earlier code requirements, and the problems that surface tend to be intermittent rather than obvious. A circuit that trips under load, an outlet that stopped working, or a fixture that flickers are all worth investigating properly rather than resetting and hoping. An electrical safety inspection can also surface issues before they become urgent, particularly in a home that has not had one in some time.
A home that has added square footage, a home office, or high-draw appliances over the years may be running closer to the limits of its original panel than the owner realizes. Panel upgrades and service upgrades are among the most common larger jobs we handle in this area. The regional climate adds to the case for getting this right: severe thunderstorms and the demand of summer cooling loads both put real pressure on panels that were sized for a lighter era. Whole-home surge protection installed at the panel is a practical addition to any panel upgrade, given how frequently the area sees lightning activity.
Recessed and LED lighting retrofits, ceiling fan wiring, outdoor outlet installation, and dedicated appliance circuits are installation jobs that come up across all property types. For a full picture of what we install and what each job involves, the service page carries the complete breakdown.
There is more on our electrical service guide.
Tucker is our primary focus on this page, but we cover a broad stretch of the surrounding area in DeKalb County as well. That includes Clarkston, Stone Mountain, Pine Lake, Mountain Park, and Lilburn, along with the neighborhoods in between. If you are not sure whether we reach your address, call and ask.
Clear communication from the first call to the final test is how every job runs. We take pride in the electrical work we leave behind, and that holds whether the property is in Tucker proper or a few miles out.
Yes. Landlords and property managers with multiple units often schedule work across several addresses at once, and we handle those conversations the same way as any other call. Describe the properties and the work involved when you call (943) 292-6289 and we will work out a schedule that makes sense for the scope.
An inspection report covers the condition of the panel, the wiring, the outlets, and the grounding and bonding throughout the property. It notes what meets current code, what does not, and what the practical risks of any deficiencies are. You get a clear picture of what is there rather than a pass or fail with no explanation.
We schedule the visit for the gap between occupancies and focus on the specific work the unit needs. Safety inspections, outlet replacements, and lighting work can typically be completed in a single visit. If the scope is larger, we talk through what can realistically be finished in the available time before anything is booked.
It starts with a look at the main panel to confirm whether it has the capacity to support a feeder run to the outbuilding. From there, the options are a subpanel in the garage or workshop, individual dedicated circuits for specific equipment, or a combination of both depending on what the space needs. We walk through the options and price the job before any work is scheduled.
It depends on what the panel currently has available. If there are open breaker slots and the panel has enough capacity to carry the added load, a new circuit can often be run without any panel work. We check the load and the available space before recommending anything, so you know whether the panel needs attention before the circuit goes in.
We can install a temporary outdoor circuit or weatherproof outlet for situations where power is needed outside for a limited period. The scope depends on the load required and how the circuit will be run. Call (943) 292-6289 and describe what you need the power for and we will explain what the installation involves.
Running power to a detached garage involves a dedicated circuit from the main panel, a cable run to the structure, and a subpanel or outlet installation inside the garage depending on what the space needs. We assess the panel capacity first, then size the circuit for the intended use, whether that is basic lighting and outlets or a workshop with heavier equipment. The route the cable takes, above ground or buried, depends on the property layout and local requirements.
It helps to have the area around the panel reasonably accessible, but it does not need to be completely empty. If stored items are blocking the panel door or making it unsafe to work near, we will ask you to move them before we start. Let us know when you call if access is limited and we can talk through what preparation makes sense.
Yes. An electrical safety inspection before a purchase or sale gives a clear picture of the panel, the wiring, and the outlets without requiring any guesswork. We walk through what is there and explain what, if anything, needs attention. Call (943) 292-6289 to schedule one and we will confirm the scope on the call.
In many cases, yes. Panel work and service upgrades often require a temporary shutoff, but work on individual circuits can frequently be isolated so the rest of the property stays live. We plan the job with that in mind where it is practical and let you know in advance which circuits will be affected and for how long.
When wiring cannot be accessed directly, we use a combination of fish tape, flexible drill bits, and inspection tools to work through existing cavities where possible. In some situations, a small amount of drywall access is unavoidable. We explain what the access situation looks like before starting and keep the disruption as limited as the job allows.
Five Pines Electrical is available every day from 6:00 AM to 11:00 PM for electrical repairs, installations, panel work, and everything in between. The next step is a phone call, and it is not a complicated one. You describe the situation, we talk through what it involves, and you get a price before anything is scheduled.
Fast turnaround. Fair pricing. Safe results.
Call (943) 292-6289 and let us take care of it.
Everywhere else we go is in our service area. Close by, we also work in: Peachtree Corners, Dunwoody, Duluth, Stonecrest.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps homes and businesses in Tucker running safely. The rows below cover every service we offer, who each one fits best, and what is practical to know before you call. Work is carried out by licensed electricians, and the scope is priced before anything is scheduled. Browse what applies to your situation, then call us to talk through the details.
| Service Type | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs, 240-volt and 220-volt outlet installation, Garage and workshop wiring, Basement circuit installation | Homeowners adding capacity or setting up a dedicated workspace | Every new circuit is sized for its intended load and connected at the panel with the correct breaker. |
| Whole-Home Surge Protection | Panel-level surge protector installation, Whole-house voltage spike protection, Protection for appliances and electronics, Surge protection for HVAC circuits | Homeowners in storm-prone areas or anyone with sensitive electronics | DeKalb County sees active summer storm seasons with frequent lightning. A panel-mounted surge protector covers the entire home, not just the outlets with a strip plugged in. |
| Older-Home Rewiring | Aluminum wiring remediation, Knob-and-tube removal and replacement, Whole-home rewiring, Grounding and bonding upgrades | Owners of pre-1980 homes with outdated or unsafe wiring | Aluminum branch-circuit wiring and knob-and-tube systems were not built for modern electrical loads. A rewire brings the home up to current code and removes the safety risks that come with outdated wiring. |
| Dedicated Appliance Circuits | Dryer and range outlet installation, Refrigerator and dishwasher circuits, Microwave and washer circuits, Load calculations for new appliances | Kitchens and laundry rooms getting new or upgraded appliances | Running a high-draw appliance on a shared circuit is a common cause of repeated breaker trips. A dedicated circuit fixes that at the source. |
| Basement & Sump-Pump Circuits | Basement outlet and lighting circuits, Dedicated sump pump circuit, GFCI protection in below-grade spaces, Basement workshop wiring | Homeowners finishing a basement or protecting against water damage | A sump pump on a shared circuit is a risk during a storm outage. A dedicated circuit with proper GFCI protection is the right setup for below-grade equipment. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Panel replacement, Meter and service entrance upgrades | Older homes with undersized panels or anyone adding significant electrical load | A 100-amp panel that worked fine decades ago often cannot keep up with today's appliances, EV chargers, and home office equipment. A 200-amp upgrade resolves the capacity problem and supports what you actually need. |
| Breaker & Fuse Repair | Breaker replacement, AFCI and arc-fault breaker installation, Fuse box troubleshooting, Breaker panel repairs | Homes with breakers that trip repeatedly or fail to reset | A breaker that keeps tripping under normal load is often a sign of an undersized circuit or a failing breaker, not just a nuisance. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Tripping breakers, Circuit diagnosis | Homeowners and tenants dealing with an immediate electrical problem | A proper diagnosis comes first so you know exactly what the repair involves before any work begins. |
| Lighting Installation | Recessed and LED lighting, Pendant and chandelier installation, Under-cabinet lighting, Exterior and security lighting | Homeowners remodeling or anyone replacing outdated fixtures | We handle the wiring and the fixture, so the job is complete in one visit rather than requiring a separate electrician follow-up. |
| Ceiling Fan Installation | New fan installation, Wiring a new ceiling location, Fan control and switch setup, Fan replacement | Homeowners adding comfort or replacing an old fan | If there is no existing wiring at the ceiling location, we run the circuit and install the correct box before mounting the fan. |
| Outlet & Switch Installation | GFCI outlet installation, USB outlet installation, Dimmer switch installation, Standard outlet and switch replacement | Homeowners upgrading interiors or landlords bringing rental units up to code | GFCI protection is code-required in kitchens, bathrooms, garages, and outdoor areas, and older homes frequently lack it. |
| Wiring for Additions & Remodels | Electrical rough-in for new additions, Remodel wiring and circuit updates, Inspection-ready wiring at each stage, Load calculations for expanded spaces | Homeowners adding square footage or renovating existing rooms | Getting the electrical rough-in right from the start means the project passes inspections at each stage without delays. |
| Backup Generator Installation | Transfer switch installation, Standby generator wiring, Whole-home generator hookup, Generator circuit setup | Homeowners and businesses that need power during outages | A proper transfer switch isolates your home from the utility grid before the generator connects, which is both a safety requirement and a code requirement in Georgia. |
| Electrical Safety Inspections | Pre-purchase wiring inspections, Pre-renovation code checks, Rental unit inspections, Panel and outlet condition review | Homebuyers, landlords, and property managers | An inspection before closing or before a renovation starts gives you a clear picture of the wiring before you commit to the next step. |
| EV Charger Installation | Level 2 charger circuit installation, 240-volt outlet for EV charging, Panel capacity check, Commercial EV circuit installation | Homeowners and businesses adding electric vehicle charging | A Level 2 charger runs on a dedicated 240-volt circuit. We check panel capacity first and handle any upgrade needed before running the circuit to your garage or driveway. |
Every situation is a little different, so call us at (943) 292-6289 and we will walk through what the work involves and what it will cost before anything is scheduled.
(943) 292-6289