Lawrenceville Electrical Company handles electrical work for homeowners, landlords, property managers, and businesses across Gwinnett County. From a single dead outlet to a full panel replacement, we scope the job on the call, show up ready to work, and get it done right. We are available every day from 7:30 AM to 11:00 PM, so you are not waiting until Monday to get an answer on something that needs attention now. One number. One call. One electrician at your door.
Call (943) 292-6289 for a quote.
Dealing with a tripping breaker or a dead outlet? Those symptoms point in a clear direction, and we follow them to the source. A breaker that keeps tripping usually means the circuit is overloaded, a wire connection has loosened, or the breaker itself has worn out. A dead outlet often traces back to a tripped GFCI upstream, a failed device, or a wiring fault at the box. We run through the diagnostics, explain what we find, and walk you through the fix before any work starts.
Flickering lights, warm switch plates, burning smells near an outlet, and outlets that spark when you plug something in are all worth a call. These are not quirks to ignore. Arc-fault and ground-fault conditions can develop quietly, and catching them early is the point of a proper diagnostic visit. We check grounding and bonding, test GFCI and AFCI protection where it applies, and confirm everything is operating the way it should. Call us and the rest is handled.
Electrical work like this comes up more than people expect, whether you are updating a kitchen, adding outdoor lighting, or just replacing a switch that stopped working. We handle GFCI outlet installation and replacement throughout bathrooms, kitchens, garages, and exterior locations where code requires it. AFCI breaker upgrades are part of that same code-compliance picture for bedrooms and living spaces. Dimmer switches, three-way switch replacements, and weatherproof outdoor outlets all fall in the same category of work that looks simple but needs to be done correctly to hold up.
On the lighting side, we install recessed LED fixtures, light fixtures, chandeliers, and under-cabinet lighting. Exterior lighting for driveways, porches, and security applications is work we do regularly. Ceiling fan installation and ceiling fan wiring are part of the mix too, including runs where there is no existing ceiling box rated for a fan. We protect your floors and finishes while we work, and we leave the space clean when we are done. We make the fix and leave it tidy.
A flickering light and a full rewire start the same way: with a clear look at what the wiring is doing and what it needs to do. Older homes in Gwinnett County sometimes still carry knob-and-tube wiring or aluminum branch-circuit wiring, both of which present real concerns as the electrical load in a home grows. Knob-and-tube replacement and aluminum-wiring remediation are jobs we handle carefully, with load calculations done before the first wire is pulled.
Dedicated circuits are the right answer for laundry rooms, kitchen appliances, garage equipment, and any large appliance that needs its own path back to the panel. A dryer, a range, or a refrigerator on a shared circuit is a problem waiting to show up. We run 240V outlets for dryers and ranges, and we size the circuit correctly for the load. For homes going through additions or remodels, we handle the wiring from rough-in through finish. Electrical work done to the code inspectors here enforce is the standard we work to on every job. Let us handle the panel and the permits.
Lawrenceville sits in a part of Georgia where the electrical demands on a home shift with the seasons. Summer cooling loads are heavy, winter heating draws real power, and the area's storm season brings lightning, power surges, and outages that can take down equipment in seconds. This area's panels, permits, and utility rules are familiar ground. The three services below come up constantly here for good reason.
An undersized panel shows itself in a few ways: breakers that trip under normal load, no room to add circuits, or a 100-amp service that cannot keep up with a modern home's demand. A panel upgrade starts with a load calculation to confirm what the service needs to carry. From there, we handle the panel replacement, the service-entrance work, and the coordination with the utility for the meter side of the job. Subpanel installation is part of this work when a detached garage or workshop needs its own feed. The cost depends on the size of the service, the condition of the existing equipment, and what the panel feeds. The rate is confirmed on the call once the job is scoped.
Georgia's storm season is not a minor consideration. Severe thunderstorms and the occasional tornado can knock out power for hours or longer, and a standby generator is only useful if the electrical hookup is done correctly. We handle the transfer switch installation, the dedicated circuit, and the panel connection that ties the generator into the home's electrical system. The transfer switch is the critical piece: it isolates your home from the utility line when the generator is running, which protects both the equipment and anyone working on the lines outside. We handle the electrical connection side of this work. The generator unit itself is a separate matter outside what we do.
A single lightning strike near a Gwinnett County neighborhood can send a voltage spike through the utility lines and into every device plugged in across the house. Whole-home surge protection installs at the panel and intercepts that spike before it reaches the wiring. It does not replace individual surge strips, but it handles the large transient events that strips are not rated to absorb. Grounding and bonding are part of the picture too, since a well-grounded system gives a surge somewhere to go. Panel and wiring work finished to code is how this gets done right.
Straight answers on the phone. Real electrical work. Quick to respond.
Your time matters, so we keep the wiring job moving from the first call through the final connection. A Level 2 home EV charger runs on a 240V dedicated circuit, and the installation starts with a panel capacity check to confirm the service can carry the added load. If the panel has room, we run the circuit and install either a hardwired charger or a 240V outlet, depending on what the setup calls for. If the panel is already near capacity, a panel upgrade may be part of the conversation. The cost is confirmed on the call after we scope the panel and the circuit run. We'll sort the wiring and clean up after.
Good electrical work isn't complicated, it's just done right, and that applies whether the building is a single-family rental or an office suite. We handle commercial electrical repairs, outlet and lighting installation, and circuit additions for businesses in Lawrenceville and the surrounding area. For rental property owners and property managers, we carry out electrical safety inspections that document the condition of the wiring, identify GFCI and AFCI gaps, and flag any code violations that need remediation before a tenant moves in or a sale closes. Pre-purchase electrical inspections follow the same pattern: a clear look at the panel, the wiring, and the devices, with the findings explained before anything else is discussed. We are a straightforward choice for homeowners and property managers who need work scoped and completed without back-and-forth. We'll sort the wiring and clean up after.
Electrical pricing depends on what the job actually involves, and that is not something that can be settled without knowing the specifics. A ceiling fan installation in a room with an existing rated box is a different job from one that needs new wiring run from the panel. A panel upgrade on a 200-amp service with room to work is a different scope from one that needs a service-entrance replacement and utility coordination. When you call, we go through what you are dealing with, ask the right questions, and give you the rate for that job before anything is scheduled. Ask what the price covers and you get a straight answer. That is the process on every call, for every job type, from a single outlet to a full rewire.
Lawrenceville is our primary market, and we cover the broader Gwinnett County area regularly. If you are in any of the communities below, give us a call.
If your town is not on the list, call anyway. We work throughout Gwinnett County and can confirm coverage when you reach us.
A Level 2 charger runs on a 240V dedicated circuit, so the first step is checking whether the panel has an open slot and enough remaining capacity to carry the added load. If the panel is at its limit, a panel upgrade is part of the conversation before the circuit is run. We install the dedicated circuit, run the wiring to the garage or driveway location, and connect either a hardwired charger or a 240V outlet depending on what the setup requires.
That depends on the panel's current load and how many open breaker slots remain. A 100-amp panel in an older Gwinnett County home is often already near capacity, and adding a 240V charger circuit on top of existing loads may require a service upgrade. We go through the panel capacity on the call and confirm what the installation will involve before anything is scheduled.
The core of a generator hookup is the transfer switch, which isolates your home from the utility line when the generator is running. We install the transfer switch, run the dedicated circuit between the transfer switch and the panel, and confirm the panel has the capacity to carry the generator's output. The generator unit itself is outside what we handle. We work on the electrical connection side only.
Flickering that happens when a large appliance like a refrigerator or air handler starts up is usually a load issue on a shared circuit. Flickering that is constant, affects multiple rooms, or comes with buzzing or a burning smell points to a wiring fault, a loose connection at the panel, or a failing breaker. The second type warrants a diagnostic visit rather than a wait-and-see approach.
A breaker trips because it is doing its job: protecting the circuit from too much current. If a breaker trips once after an obvious overload and stays reset, that is normal. If it trips repeatedly under normal use, the circuit may be undersized for the load, a wiring fault may be drawing excess current, or the breaker itself may have worn out. Repeated tripping on the same circuit is worth a diagnostic visit rather than repeated resets.
Discoloration or scorch marks around the outlet face, a warm or hot outlet cover, a burning or plastic smell near the receptacle, and an outlet that no longer holds a plug firmly are all signs the device itself needs to be replaced. A GFCI outlet that trips immediately every time it is reset may have a fault in the downstream wiring rather than the outlet itself. We check both the device and the circuit during a diagnostic visit.
After the work is done, we test the circuits, outlets, and devices involved to confirm they are operating correctly. For panel work, we verify that breakers are seated properly, load is distributed as expected, and the panel is closed and labeled. For outlet and lighting work, we test each device before we leave. The job is not done until the work checks out.
Older wiring is brought up to current standards in the areas where work is being done. A full whole-home rewire addresses everything at once. A targeted repair or upgrade corrects the affected circuits and flags anything else that needs attention. We explain what we find and what the correction involves before any work starts, so you know the scope and the cost before we proceed.
A whole-home surge protector installs at the panel and intercepts large voltage spikes at the service entrance before they reach the wiring inside the home. It covers every circuit in the house, including those feeding appliances, electronics, and EV charger circuits. It does not replace individual surge strips for sensitive equipment, but it handles the large transient events that strips are not rated to absorb on their own.
An inspection is a practical step before a home sale, after purchasing an older home, before a major renovation, or when a panel upgrade is being considered. It gives you a clear picture of the condition of the wiring, identifies GFCI and AFCI gaps, and flags any code issues before they show up on a buyer's inspection report or a permit review. We explain what we find during the inspection before any repair work is discussed.
We are available every day from 7:30 AM to 11:00 PM. Call before anything is scheduled, get the price on the phone, and know what the visit covers before we arrive. Pick up the phone. Get a straight answer. That is how we work.
Call (943) 292-6289 to get started.
We handle the full range of electrical work for Lawrenceville homeowners, landlords, and businesses, from a single outlet repair to a complete service upgrade. Every job starts with a call where we scope the work, explain what it involves, and give you a price before anything is scheduled. The rows below cover what each service includes, who it fits best, and what is useful to know going in.
Call (943) 292-6289 to get started.
| Electrical Service | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| EV Charger Installation | 240V dedicated circuit installationPanel capacity checkHardwired charger or 240V outlet setupPanel upgrade coordination if needed | Homeowners adding an electric vehicle and needing a reliable Level 2 charging setup at home | Installation starts with a panel capacity check. If the panel is near its limit, a service upgrade may be part of the scope. We confirm both on the call. |
| Older-Home Rewiring | Knob-and-tube wiring replacementAluminum branch-circuit remediationLoad calculation before rewireGrounding and bonding updates | Gwinnett County homes with aging wiring that cannot safely carry a modern electrical load | Aluminum branch-circuit wiring and knob-and-tube both present real concerns as home electrical loads grow. We explain the scope and cost before any wire is pulled. |
| Breaker & Fuse Repair | Breaker replacement and testingFuse panel assessmentCircuit load evaluationPanel interior inspection | Homes where a breaker trips repeatedly or a fuse blows under normal load | A breaker that trips once after an obvious overload is doing its job. One that trips repeatedly under normal use points to a circuit or wiring issue worth diagnosing. |
| Ceiling Fan Installation | Fan mounting and wiringCeiling box upgrade for fan-rated supportSwitch and remote wiringReplacement of existing fans | Any room where a fan is being added or replaced, including locations without an existing fan-rated ceiling box | A standard light fixture box is not rated to support a ceiling fan. We upgrade the box when needed before the fan goes up. |
| Electrical Panel & Service Upgrades | Load calculation and service sizingPanel replacement and breaker installationService-entrance and meter coordinationSubpanel installation for garages and workshops | Homes with a 100-amp service, a full panel, or breakers that trip under normal load | A panel upgrade typically requires utility coordination for the meter side of the job. We handle the permit and inspection process as part of the work. |
| Dedicated Appliance Circuits | 240V circuits for dryers and rangesCircuits for refrigerators and dishwashersGarage and workshop equipment circuitsCircuit sizing for the specific appliance load | Any home where a major appliance is sharing a circuit or where a new appliance requires its own dedicated feed | A dryer, range, or large refrigerator on a shared circuit is a common source of tripping breakers and voltage drop. A dedicated circuit sized to the load fixes both. |
| Wiring for Additions & Remodels | Rough-in wiring for new construction areasCircuit additions for expanded spacesOutlet and lighting placement per planFinal connections and device installation | Homeowners adding a room, finishing a basement, or remodeling a kitchen or bathroom | Remodel wiring is permitted and inspected as part of the overall project. We coordinate the electrical scope with the build schedule. |
| Backup Generator Installation | Transfer switch installationDedicated generator circuitPanel connection and load confirmationUtility isolation setup | Gwinnett County homeowners who want reliable power through the area's storm season | The transfer switch is the critical piece. It isolates the home from the utility line when the generator is running, protecting equipment and utility workers alike. We handle the electrical connection side only. |
| Lighting Installation | Recessed LED and fixture installationExterior and security lightingUnder-cabinet and accent lightingChandelier and ceiling fixture work | Homeowners updating a room, adding outdoor lighting, or replacing fixtures that have failed | Exterior lighting for porches, driveways, and security applications is work we do regularly. We protect floors and finishes while we work. |
| Outlet & Switch Installation | GFCI outlet installation and replacementAFCI breaker upgradesDimmer and three-way switch workWeatherproof outdoor outlets | Kitchens, bathrooms, garages, and exterior locations where code requires GFCI protection or existing devices have failed | GFCI and AFCI protection requirements are set by code and vary by location in the home. We confirm what applies before the work starts. |
| Whole-Home Surge Protection | Panel-mounted surge device installationGrounding and bonding checkProtection for all home circuitsCoordination with EV charger and appliance circuits | Any Lawrenceville home exposed to lightning and utility voltage spikes, especially those with sensitive electronics or EV chargers | A panel-level surge protector intercepts large transient events that individual power strips are not rated to handle. It covers every circuit in the house. |
| Electrical Repairs & Troubleshooting | Dead outlets and failed switchesArc-fault and ground-fault diagnosticsLoose or damaged wiring connectionsBurning smells and sparking devices | Any homeowner or property manager dealing with a wiring symptom that needs a clear answer | Warm outlets, buzzing switches, and repeated breaker trips all point to specific faults. We trace the problem before replacing anything. |
How do I know if my home needs a panel upgrade or just a repair?
A panel upgrade is usually the right call when breakers trip repeatedly under normal load, there are no open slots for new circuits, or the home is still on a 100-amp service and the electrical demand has grown. A repair is the right call when a single breaker or device has failed. When you call, we go through the symptoms and tell you which direction the job is likely to go before anything is scheduled.
Is electrical work in Lawrenceville permitted and inspected?
Panel upgrades, service changes, new circuit installations, and remodel wiring all typically require a permit and a code inspection. We handle the permit process as part of the work and schedule the inspection through the appropriate authority. The inspection is how the work gets confirmed as complete and correct, and it protects you when the home is sold or insured.
What are the risks of aluminum or knob-and-tube wiring in an older Gwinnett County home?
Knob-and-tube wiring was installed without a ground conductor, and the insulation on older runs becomes brittle over time. Aluminum branch-circuit wiring expands and contracts differently than copper, which can loosen connections at outlets and switches and create heat at those points. Both systems were adequate when they were installed, but neither handles the electrical load of a modern home well. We assess what is there and explain the remediation options before any work starts.
Faults Traced Before Anything Is Replaced
We run through the diagnostics and explain what we find before any repair work starts. You know what the problem is and what fixing it involves before we pick up a tool.
Do I need to be home when the electrical work is done?
For most jobs, someone needs to be present or the property needs to be accessible so we can reach the panel, the outlets, and the areas where the work is being done. For rental properties, property managers often arrange access on behalf of the tenant. We confirm the access situation on the call when the job is scheduled.
What does GFCI protection cover, and where is it required?
GFCI protection is required by code in locations where an outlet is near water or in a wet or damp environment. That covers bathrooms, kitchens, garages, crawl spaces, unfinished basements, and all exterior outlet locations. A GFCI device cuts power in milliseconds when it detects a ground fault, which is what makes it effective in those areas. We confirm what is required and what is missing during any diagnostic or installation visit.
How long does a panel upgrade typically take?
A straightforward panel replacement on an existing service usually takes most of a workday. A job that also involves a service-entrance upgrade, utility coordination, or subpanel installation takes longer. We go through the scope on the call and give you a realistic time estimate before the work is scheduled. Power to the home is off for the portion of the job where the panel is being replaced.
Permits and Inspection Handled Where Required
Panel upgrades, new circuits, and remodel wiring are permitted and inspected work. We handle that process as part of the job so the work is on record and the inspection is done correctly.
Can I add a circuit for a workshop or garage equipment without upgrading the panel?
It depends on how much capacity the panel has left. If there are open breaker slots and the service has room to carry the added load, a new circuit can be run without touching the panel. If the panel is at capacity, a panel upgrade or subpanel installation is part of the conversation. We check both when you call and tell you what the job actually involves.
What does a whole-home rewire involve from start to finish?
A full rewire replaces the branch-circuit wiring throughout the home, from the panel to every outlet, switch, and fixture. The scope includes pulling new wire, updating the panel if needed, installing new devices, and confirming grounding and bonding throughout. It is permitted and inspected work. We do a load calculation before any wire is pulled and walk you through what the job covers and what it costs before anything is scheduled.
Older and Newer Wiring Both Handled
Gwinnett County homes range from recent builds to older properties with knob-and-tube or aluminum wiring. We work on both and explain what we find before the scope is set.
How does surge protection at the panel differ from a power strip?
A panel-mounted surge protector sits at the service entrance and intercepts large voltage spikes before they reach the wiring inside the home. It covers every circuit in the house, including circuits feeding appliances that are not plugged into a strip. Individual strips handle smaller transients at the device level. The two work together, but the panel device handles the large events that strips are not rated to absorb on their own.
When is it safer to call an electrician than to handle something yourself?
Any work that involves the panel, the service entrance, or new wiring runs should be handled by someone who knows what they are doing. Beyond that, a warm outlet, a buzzing switch, a burning smell, or a breaker that trips repeatedly are all signs of a fault that needs a proper diagnostic. Swapping a light fixture or a switch cover is one thing. Anything that involves opening a panel, running wire, or investigating a symptom that keeps coming back is worth a call.
Is my home ready for the electrical load of a new addition or major appliance?
That depends on the current service size, how loaded the panel already is, and what the new load will draw. A 200-amp service with open slots handles most additions without a panel upgrade. A 100-amp service in an older Gwinnett County home may already be near its limit. We do a load calculation on the call when you describe what you are adding and tell you whether the panel can carry it or whether an upgrade is part of the scope.
Call (943) 292-6289 to go over the job, get a price, and find out what the visit covers before anything is scheduled.
(943) 292-6289