Most people call a handyman first. That is a reasonable instinct, but a flickering circuit, a breaker that will not stay reset, or an outlet that stopped working last week are jobs that belong to a licensed electrician. The wiring behind the wall tells a story, and reading it correctly is what keeps a small problem from becoming a serious one. Five Pines Electrical handles that kind of call every day for homes and businesses throughout Duluth and the surrounding area.
The work ranges from a single outlet repair to a full panel replacement, and everything in between. Rental property owners keeping units up to code, homeowners adding circuits for new appliances, and business operators who need electrical work done without shutting down for the day all have different needs, and we handle them all. Work is carried out by licensed electricians, and the scope is explained before anything starts.
Electrical problems don't wait, and neither do we, so when you call, the first thing we do is talk through what you are dealing with. From that conversation, we can give you a clear sense of what the job involves and what it will cost. Nothing is scheduled until you know the price and what it covers.
What changes a quote is usually the scope of the work. A straightforward outlet replacement is a different conversation than running a new circuit from the panel to a finished room. If the diagnosis turns up something unexpected, we explain it before we proceed. You get a straight answer on what it covers, and the scope of the electrical work is priced before it starts.
To get a quote on any electrical job in Duluth, call (943) 292-6289. We are open every day from 6:00 AM to 11:00 PM.
Same-day service is often available, and we work to find a time that fits your schedule rather than ours. If you call in the morning, there is a real chance we can have someone out the same day. We are available every day from 6:00 AM to 11:00 PM, including weekends, so the window is wider than most people expect.
For rental properties and commercial spaces, we understand that the building cannot always go dark while the work happens. We talk through the timing on the call so the visit fits around tenants or business hours where that is possible. An urgent fault that cannot wait gets treated accordingly.
When you call, you reach a real person who knows the area and can talk through what the job involves. Clear communication from the first call to the final test is how every visit runs.
Not every electrical call looks the same, and the kind of housing in a city like Duluth shapes what we see most often. Established neighborhoods with older homes carry wiring that was installed to the standards of a different era. Newer construction has its own set of demands as households add appliances, EV chargers, and home office equipment that the original panel was not sized for. The service page carries the full breakdown of what we handle, but the jobs that come up most often fall into a few clear categories.
A dead outlet, a light that flickers under load, or a breaker that trips every time the microwave runs are the calls that come in most often. We trace the fault to its source rather than replacing parts until something works. GFCI protection that has tripped without resetting, arc-fault breakers that are doing their job by catching a wiring problem, and circuits that are simply overloaded all present differently, and the diagnosis matters. We get to the bottom of the problem fast.
Homes that have not had their panels touched in twenty or thirty years are frequently running on capacity that no longer matches what the household needs. The regional climate puts real demand on electrical systems, particularly in summer when cooling loads are at their peak. A 200-amp service upgrade gives the home the headroom it needs, and we run a load calculation before recommending a panel size so the upgrade is right for the actual load, not just the largest standard option.
Adding a circuit for a dryer, a range, a refrigerator, or a workshop is work that starts at the panel and ends at the right outlet for the job. We size the circuit correctly, run it to code, and install the outlet or connection the appliance or equipment requires. For EV chargers, we check panel capacity first, because a Level 2 charger on a panel that is already close to its limit needs the upgrade handled before the circuit is run.
Every property has its own electrical picture, and the jobs that come out of it are specific to what is there. Here is what each of the following involves in practice.
Replacing a fixture is straightforward when the wiring is already in place. When it is not, we run it. Recessed lighting, pendant fixtures, and LED retrofits all involve more than swapping one fitting for another when the circuit needs to be extended or the switch wiring reconfigured. We handle the full installation, not just the fixture.
A welder or air compressor draws far more current than a standard 15-amp or 20-amp circuit can carry. Running a dedicated 240-volt circuit for workshop equipment is the right answer, and it starts with checking whether the panel has a slot and the capacity to support it. We size the circuit for the equipment and install the correct outlet so the tool runs without tripping the breaker every time it starts up.
Grounding and bonding are not optional details. They are what keeps a fault from becoming a shock hazard and what surge protection relies on to work correctly. Older homes sometimes have grounding that was never completed properly or bonding that has been disrupted by a previous repair. We identify what is missing and correct it, which is often the first step before other electrical work can proceed.
An intermittent fault is the hardest kind to catch. A breaker that trips only under certain conditions, a light that flickers only at night, or an outlet that works most of the time requires a methodical approach rather than a quick swap. We check the circuit, the connections, and the load before drawing a conclusion. Reach out and we'll get it diagnosed.
Ground-fault and arc-fault protection are code requirements in kitchens, bathrooms, garages, and exterior locations, and they are also the protection that actually catches the faults most likely to cause harm. Older homes frequently lack one or both where current code requires them. We install GFCI outlets and AFCI breakers where they belong, and we explain what each one does and why it is there before we leave.
Doing electrical work right matters, and we'll help you get it right, which sometimes means working out whether the fault is inside the home or on the utility company's equipment. The dividing line runs at the meter. Everything on the house side of the meter is our work. The service entrance, the meter itself, and the lines running to it belong to the utility.
When we trace a fault and find it is on the utility's side, we tell you clearly what we found and what the next step is. That usually means contacting the utility company directly, and we can explain what to tell them so the call goes to the right department. We do not leave you guessing about which side of the line the problem sits on.
The specifics for a job like this are on our wiring guide.
We cover Duluth and the communities around it throughout Gwinnett County. That includes Berkeley Lake, Johns Creek, Peachtree Corners, Norcross, and Suwanee, along with the neighborhoods and unincorporated areas in between. If you are not sure whether we reach your address, call and ask.
Every job gets treated like it matters, because it does. The service area is broad, and the scheduling process is the same wherever you are in it. Call (943) 292-6289 and we will find a time that works.
The electrician needs to be present for the rough-in stage before walls are closed, for any inspection that the permit process requires, and for the finish stage when fixtures and devices are installed. If the renovation involves a panel upgrade or service work, that typically happens early in the project. We coordinate the timing with you so the electrical stages do not hold up the rest of the work.
A workshop with power tools, compressors, or welding equipment typically needs dedicated 240-volt circuits in addition to standard outlets, and the panel has to have the capacity to support them. Proper grounding is especially important in a workshop setting. We size the circuits for the actual equipment you plan to run rather than guessing, so the wiring handles the real load.
Yes, an intermittent fault is worth reporting promptly. A problem that appears and disappears is often a sign of a loose connection, a failing breaker, or wiring that is beginning to break down, and those conditions tend to worsen over time. Catching it early is safer and usually less involved than waiting until something stops working entirely. Call (943) 292-6289 and describe what you are seeing so we can assess what the visit should cover.
If the planned route cannot be trenched, we look at alternate paths that avoid the obstruction, whether that means a different line across the property or a conduit run along a surface where trenching is not possible. We explain the options and what each one involves before any work begins. The goal is a code-compliant installation that works for the actual conditions at the property.
We can install a temporary outdoor circuit or weatherproof outlet for situations where power is needed outside for a limited period. The scope depends on the load required and how the circuit will be run. Call (943) 292-6289 and describe what you need the power for and we will explain what the installation involves.
It depends on what the panel currently has available. If there are open breaker slots and the panel has enough capacity to carry the added load, a new circuit can often be run without any panel work. We check the load and the available space before recommending anything, so you know whether the panel needs attention before the circuit goes in.
The electrical side is ours. We run the dedicated circuit, install the disconnect, and handle any panel work needed to support the load. The heating or cooling equipment itself, the unit, the refrigerant, the ductwork, is handled by an HVAC contractor. If your new system needs a circuit or a panel upgrade to support it, call us and we will take care of the electrical portion.
The most common calls involve breakers that trip under normal load, outlets that have stopped working, and lighting that flickers or dims when other appliances run. Older homes in established Duluth neighborhoods sometimes have panels or wiring that was never updated to handle modern electrical loads, and those situations often show up as repeated faults rather than a single clear failure. A diagnostic visit traces the problem to its source so the fix addresses the actual cause.
Yes. We work with landlords and property managers scheduling inspections between tenants, business operators who need new circuits or panel work done around their hours, and anyone managing a property that needs electrical work handled on a schedule. We talk through timing on the call so the visit fits the situation. Work is carried out by licensed electricians and the scope is confirmed before anything starts.
Running power to a detached garage involves a dedicated circuit from the main panel, a cable run to the structure, and a subpanel or outlet installation inside the garage depending on what the space needs. We assess the panel capacity first, then size the circuit for the intended use, whether that is basic lighting and outlets or a workshop with heavier equipment. The route the cable takes, above ground or buried, depends on the property layout and local requirements.
Severe thunderstorms move through Gwinnett County regularly, and the voltage spikes that come with nearby lightning strikes can damage appliances, electronics, and electrical equipment throughout a home. Whole-home surge protection installed at the panel intercepts those spikes before they reach your devices, which is a different level of protection than a power strip provides. Backup generator hookups are also worth considering for households or businesses where a multi-day outage creates a real problem.
Five Pines Electrical is open every day from 6:00 AM to 11:00 PM for electrical repairs, installations, and panel work throughout Duluth and the surrounding area. We answer, we explain the work and the cost before anything is scheduled, and we show up to do it. Fast turnaround. Fair pricing. Safe results.
Call (943) 292-6289 for a quote on any electrical job in Duluth.
Everywhere else we go is in our service area. Close by, we also work in: Johns Creek, Peachtree Corners, Suwanee, Alpharetta.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps homes and businesses in Duluth running safely. The rows below cover every service we offer, who each one fits best, and what is practical to know before you call. Work is carried out by licensed electricians, and the scope is priced before anything is scheduled. Browse what applies to your situation, then call us to talk through the details.
| Service Type | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs, 240-volt and 220-volt outlet installation, Garage and workshop wiring, Basement circuit installation | Homeowners adding capacity or setting up a dedicated workspace | Every new circuit is sized for its intended load and connected at the panel with the correct breaker. |
| Whole-Home Surge Protection | Panel-level surge protector installation, Whole-house voltage spike protection, Protection for appliances and electronics, Surge protection for HVAC circuits | Homeowners in storm-prone areas or anyone with sensitive electronics | Gwinnett County sees active summer storm seasons with frequent lightning. A panel-mounted surge protector covers the entire home, not just the outlets with a strip plugged in. |
| Older-Home Rewiring | Aluminum wiring remediation, Knob-and-tube removal and replacement, Whole-home rewiring, Grounding and bonding upgrades | Owners of pre-1980 homes with outdated or unsafe wiring | Aluminum branch-circuit wiring and knob-and-tube systems were not built for modern electrical loads. A rewire brings the home up to current code and removes the safety risks that come with outdated wiring. |
| Dedicated Appliance Circuits | Dryer and range outlet installation, Refrigerator and dishwasher circuits, Microwave and washer circuits, Load calculations for new appliances | Kitchens and laundry rooms getting new or upgraded appliances | Running a high-draw appliance on a shared circuit is a common cause of repeated breaker trips. A dedicated circuit fixes that at the source. |
| Basement & Sump-Pump Circuits | Basement outlet and lighting circuits, Dedicated sump pump circuit, GFCI protection in below-grade spaces, Basement workshop wiring | Homeowners finishing a basement or protecting against water damage | A sump pump on a shared circuit is a risk during a storm outage. A dedicated circuit with proper GFCI protection is the right setup for below-grade equipment. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Panel replacement, Meter and service entrance upgrades | Older homes with undersized panels or anyone adding significant electrical load | A 100-amp panel that worked fine decades ago often cannot keep up with today's appliances, EV chargers, and home office equipment. A 200-amp upgrade resolves the capacity problem and supports what you actually need. |
| Breaker & Fuse Repair | Breaker replacement, AFCI and arc-fault breaker installation, Fuse box troubleshooting, Breaker panel repairs | Homes with breakers that trip repeatedly or fail to reset | A breaker that keeps tripping under normal load is often a sign of an undersized circuit or a failing breaker, not just a nuisance. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Tripping breakers, Circuit diagnosis | Homeowners and tenants dealing with an immediate electrical problem | A proper diagnosis comes first so you know exactly what the repair involves before any work begins. |
| Lighting Installation | Recessed and LED lighting, Pendant and chandelier installation, Under-cabinet lighting, Exterior and security lighting | Homeowners remodeling or anyone replacing outdated fixtures | We handle the wiring and the fixture, so the job is complete in one visit rather than requiring a separate electrician follow-up. |
| Ceiling Fan Installation | New fan installation, Wiring a new ceiling location, Fan control and switch setup, Fan replacement | Homeowners adding comfort or replacing an old fan | If there is no existing wiring at the ceiling location, we run the circuit and install the correct box before mounting the fan. |
| Outlet & Switch Installation | GFCI outlet installation, USB outlet installation, Dimmer switch installation, Standard outlet and switch replacement | Homeowners upgrading interiors or landlords bringing rental units up to code | GFCI protection is code-required in kitchens, bathrooms, garages, and outdoor areas, and older homes frequently lack it. |
| Wiring for Additions & Remodels | Electrical rough-in for new additions, Remodel wiring and circuit updates, Inspection-ready wiring at each stage, Load calculations for expanded spaces | Homeowners adding square footage or renovating existing rooms | Getting the electrical rough-in right from the start means the project passes inspections at each stage without delays. |
| Backup Generator Installation | Transfer switch installation, Standby generator wiring, Whole-home generator hookup, Generator circuit setup | Homeowners and businesses that need power during outages | A proper transfer switch isolates your home from the utility grid before the generator connects, which is both a safety requirement and a code requirement in Georgia. |
| Electrical Safety Inspections | Pre-purchase wiring inspections, Pre-renovation code checks, Rental unit inspections, Panel and outlet condition review | Homebuyers, landlords, and property managers | An inspection before closing or before a renovation starts gives you a clear picture of the wiring before you commit to the next step. |
| EV Charger Installation | Level 2 charger circuit installation, 240-volt outlet for EV charging, Panel capacity check, Commercial EV circuit installation | Homeowners and businesses adding electric vehicle charging | A Level 2 charger runs on a dedicated 240-volt circuit. We check panel capacity first and handle any upgrade needed before running the circuit to your garage or driveway. |
Every situation is a little different, so call us at (943) 292-6289 and we will walk through what the work involves and what it will cost before anything is scheduled.
(943) 292-6289