Some electrical problems are urgent. A burning smell near a panel, an outlet that stopped working overnight, a breaker that will not reset after a storm: these are calls that should not sit on a list until next week. Others, like adding circuits to a garage, upgrading a panel before a renovation, or installing an EV charger, can be scheduled at a time that works for everyone. Five Pines Electrical handles both kinds, and the approach is the same either way: licensed electricians, clear pricing, and work done to code.
Roswell has a mix of housing that keeps electrical calls varied. Older established neighborhoods carry wiring that was never designed for today's loads. Newer construction brings its own set of questions, especially when additions, remodels, or high-draw appliances push a panel toward its limits. Property managers and businesses in the area have their own needs too, and we work around occupied spaces and operating hours when the job calls for it. Call (943) 292-6289 to talk through what you need.
Electrical work in an apartment or condo does not always start at your front door. The panel serving your unit may be in a hallway, a utility room, or a common area that the building manages. What is inside your walls is yours to deal with. What feeds the building from the street, and what runs through shared infrastructure, belongs to the building's electrical system, and questions about those parts go to the property manager or the building's maintenance contact.
That boundary matters when something goes wrong. If an outlet in your unit is dead, we can trace and fix it. If the supply feeding your floor is the problem, that is a conversation to have with whoever manages the building first. We will tell you which side of the line the fault is on, and we will do it plainly so you know exactly what to ask for.
The scope of the electrical work is priced before it starts. When you call, we ask enough questions to understand what the job involves, and we give you a rate that reflects what we actually expect to find. That rate covers the work as described. If the job turns out to be more involved than a phone call can reveal, we say so before we go further, not after.
A few things can change a quote once we are on site. Opening a wall and finding aluminum branch-circuit wiring where copper was expected changes the remediation approach. A panel that looks like a straightforward upgrade on the outside may have wiring conditions inside that need to be addressed before the new panel goes in. We explain what we find and what it means before any additional work is authorized. The price is confirmed before the work is scheduled, and you can ask what it covers and get a straight answer.
Not every electrical call is the same, and the situation that leads to one is usually more useful to understand than a list of service names. Here is how the work tends to divide up.
Flickering lights, a circuit that keeps tripping, an outlet that went dead for no obvious reason: these calls start with a diagnosis. We trace the problem to its source before any work begins. That might mean checking the breaker, testing the wiring feeding the affected circuit, or looking at whether arc-fault or ground-fault protection is missing where code now requires it. The fix depends on what the diagnosis finds, and we walk you through it before we start. We get to the bottom of the problem fast.
A panel that cannot carry the load is a safety issue before it is an inconvenience. Older homes in the area sometimes carry 100-amp service that was adequate when it was installed but struggles with the combination of air conditioning, home offices, EV chargers, and modern appliances running at the same time. We handle panel replacements, 200-amp service upgrades, and subpanel additions for detached garages or additions. A load calculation comes first so the upgrade is sized for what the home actually needs, not just what the old panel was rated for.
Aluminum wiring remediation belongs here too. Aluminum branch-circuit wiring was common in certain construction eras, and it behaves differently from copper at connections and terminations. We assess what is there and explain the remediation options before any work is priced. The full breakdown of panel and service work is on the services page.
Adding a circuit is not always a simple run from the panel. The panel has to have the capacity, the wiring has to be sized for the load, and the installation has to meet current code. We handle dedicated circuits for dryers, ranges, dishwashers, and other high-draw appliances, along with EV charger circuits, backup generator hookups and transfer switch installation, and whole-home surge protection at the panel. Grounding and bonding are part of every installation, not an afterthought. Work is carried out by licensed electricians, and the scope is confirmed before anything is scheduled.
Same-day service is often available for calls that cannot wait. When something goes wrong with the wiring or the panel, waiting a week is not always an option, and we work to fit urgent calls into the schedule. We are available every day from 6:00 AM to 11:00 PM, so there is a real window to work with even on weekends.
For scheduled work, we confirm the appointment window when you book so you can plan around it. If the property is occupied by a tenant, or if it is a business that needs to stay open while the work happens, we talk through the approach on the call and work around what the situation requires. Every job gets treated like it matters, because it does.
Some jobs come up in Roswell more than others, and the ones below are worth describing in a little more detail.
Grounding and bonding problems rarely announce themselves the way a tripped breaker does. They show up in subtle ways: a mild tingle from a faucet, equipment that seems to run rough, or a safety inspection that flags the panel. Proper grounding gives fault current a path that does not run through a person, and bonding keeps metal components in the system at the same potential. In older homes, these were sometimes done partially or not at all. We assess what is there, explain what needs to be corrected, and do the work to code.
Rewiring comes up when the existing wiring is no longer adequate for the load, when knob-and-tube or aluminum branch-circuit wiring needs to be replaced, or when a renovation opens up walls and makes the work practical. A whole-home rewire is a significant project, and a partial rewire covering a kitchen, a bathroom, or a specific floor is sometimes the right scope. We look at what is there and give you a clear picture of what the work involves before any pricing is confirmed.
A ceiling fan installation is straightforward when there is an existing box rated for a fan and the wiring is already in place. It is a different job when the ceiling has no box, no wiring, and no switch loop. We handle both, including running new wiring to a ceiling location and installing the right box for the weight of the fan. Replacement fans on existing wiring are usually quicker, but we check the box and the wiring condition before the new fan goes up.
A workshop circuit for a welder or an air compressor is not the same as a standard 20-amp outlet. These loads are high-draw and often intermittent in a way that stresses wiring and connections over time. We size the circuit for the equipment, run the right wire gauge, and install the correct outlet or hardwired connection. If the panel does not have the capacity, we say so before the circuit is run. Doing electrical work right matters, and we will help you get it right.
the electrical details page explains the range of work covered.
We cover Roswell and the communities around it across Fulton County and the surrounding area. That includes Mountain Park, Alpharetta, Dunwoody, Sandy Springs, and Milton, along with the neighborhoods and subdivisions in between. If you are not sure whether your address falls within the area we cover, call and ask.
Scheduling is straightforward. You call, we talk through the job, and we confirm what the work involves and what it will cost before anything is put on the calendar. Licensed electricians. Code-compliant wiring. Fair rates.
A workshop with power tools, compressors, or welding equipment typically needs dedicated 240-volt circuits in addition to standard outlets, and the panel has to have the capacity to support them. Proper grounding is especially important in a workshop setting. We size the circuits for the actual equipment you plan to run rather than guessing, so the wiring handles the real load.
We are available every day from 6:00 AM to 11:00 PM, which covers early morning and evening windows that work for many commercial properties that cannot have electrical work done during business hours. Call (943) 292-6289 and describe the property, the scope, and the scheduling constraints, and we will find a time that fits.
It starts with a circuit from the main panel, sized for what the shed will be used for. A shed used only for lighting and a few outlets needs a much smaller circuit than one running power tools or a compressor. We confirm panel capacity, run the circuit, and install the appropriate outlets and any subpanel the space requires. The job scope depends on the shed's intended use, so it helps to describe that when you call.
First check whether the outage is limited to your property or affects the street around you. If your neighbors have power and you do not, the problem is likely on your side of the meter, and that is work we can look at. If the outage is wider, the utility handles the line side. Once utility power is restored, if circuits or equipment in your home are not behaving normally, call us and we will trace what happened.
An inspection report covers the condition of the panel, the wiring, the outlets, and the grounding and bonding throughout the property. It notes what meets current code, what does not, and what the practical risks of any deficiencies are. You get a clear picture of what is there rather than a pass or fail with no explanation.
It helps to have the area around the panel reasonably accessible, but it does not need to be completely empty. If stored items are blocking the panel door or making it unsafe to work near, we will ask you to move them before we start. Let us know when you call if access is limited and we can talk through what preparation makes sense.
Call us at (943) 292-6289 and describe what you are seeing. If the issue is related to work we completed, we want to know about it and we will work out how to address it. Describe what stopped working and when, and we will talk through whether it connects to the recent job or points to something separate.
We can install a temporary outdoor circuit or weatherproof outlet for situations where power is needed outside for a limited period. The scope depends on the load required and how the circuit will be run. Call (943) 292-6289 and describe what you need the power for and we will explain what the installation involves.
We start with a load calculation to see how much capacity the panel is currently using and how much headroom is left. We also look at the condition of the panel itself, the breaker ratings, and whether the service entrance is sized to support the additional draw. That review happens before any new circuit or appliance connection is scheduled.
The electrical side is ours. We run the dedicated circuit, install the disconnect, and handle any panel work needed to support the load. The heating or cooling equipment itself, the unit, the refrigerant, the ductwork, is handled by an HVAC contractor. If your new system needs a circuit or a panel upgrade to support it, call us and we will take care of the electrical portion.
Permit requirements for panel replacements and service upgrades vary depending on the scope of the work and the jurisdiction. We confirm what applies at your address before the job is scheduled, so you are not left guessing about what the process involves. If a permit is required, we walk you through what that means for the timeline.
Fast turnaround. Fair pricing. Safe results.
Electrical work that is done properly does not leave questions behind. The circuit is tested before we leave, the wiring is secured, and the space is left the way we found it. Five Pines Electrical is available every day from 6:00 AM to 11:00 PM. Call (943) 292-6289 for a quote on any electrical job in Roswell or the surrounding area.
Everywhere else we go is in our service area. Close by, we also work in: Alpharetta, Dunwoody, Sandy Springs, Peachtree Corners, Johns Creek.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps homes and businesses in Roswell running safely. The rows below cover every service we offer, who each one fits best, and what is practical to know before you call. Work is carried out by licensed electricians, and the scope is priced before anything is scheduled. Browse what applies to your situation, then call us to talk through the details.
| Service Type | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs, 240-volt and 220-volt outlet installation, Garage and workshop wiring, Basement circuit installation | Homeowners adding capacity or setting up a dedicated workspace | Every new circuit is sized for its intended load and connected at the panel with the correct breaker. |
| Whole-Home Surge Protection | Panel-level surge protector installation, Whole-house voltage spike protection, Protection for appliances and electronics, Surge protection for HVAC circuits | Homeowners in storm-prone areas or anyone with sensitive electronics | Fulton County sees active summer storm seasons with frequent lightning. A panel-mounted surge protector covers the entire home, not just the outlets with a strip plugged in. |
| Older-Home Rewiring | Aluminum wiring remediation, Knob-and-tube removal and replacement, Whole-home rewiring, Grounding and bonding upgrades | Owners of pre-1980 homes with outdated or unsafe wiring | Aluminum branch-circuit wiring and knob-and-tube systems were not built for modern electrical loads. A rewire brings the home up to current code and removes the safety risks that come with outdated wiring. |
| Dedicated Appliance Circuits | Dryer and range outlet installation, Refrigerator and dishwasher circuits, Microwave and washer circuits, Load calculations for new appliances | Kitchens and laundry rooms getting new or upgraded appliances | Running a high-draw appliance on a shared circuit is a common cause of repeated breaker trips. A dedicated circuit fixes that at the source. |
| Basement & Sump-Pump Circuits | Basement outlet and lighting circuits, Dedicated sump pump circuit, GFCI protection in below-grade spaces, Basement workshop wiring | Homeowners finishing a basement or protecting against water damage | A sump pump on a shared circuit is a risk during a storm outage. A dedicated circuit with proper GFCI protection is the right setup for below-grade equipment. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Panel replacement, Meter and service entrance upgrades | Older homes with undersized panels or anyone adding significant electrical load | A 100-amp panel that worked fine decades ago often cannot keep up with today's appliances, EV chargers, and home office equipment. A 200-amp upgrade resolves the capacity problem and supports what you actually need. |
| Breaker & Fuse Repair | Breaker replacement, AFCI and arc-fault breaker installation, Fuse box troubleshooting, Breaker panel repairs | Homes with breakers that trip repeatedly or fail to reset | A breaker that keeps tripping under normal load is often a sign of an undersized circuit or a failing breaker, not just a nuisance. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Tripping breakers, Circuit diagnosis | Homeowners and tenants dealing with an immediate electrical problem | A proper diagnosis comes first so you know exactly what the repair involves before any work begins. |
| Lighting Installation | Recessed and LED lighting, Pendant and chandelier installation, Under-cabinet lighting, Exterior and security lighting | Homeowners remodeling or anyone replacing outdated fixtures | We handle the wiring and the fixture, so the job is complete in one visit rather than requiring a separate electrician follow-up. |
| Ceiling Fan Installation | New fan installation, Wiring a new ceiling location, Fan control and switch setup, Fan replacement | Homeowners adding comfort or replacing an old fan | If there is no existing wiring at the ceiling location, we run the circuit and install the correct box before mounting the fan. |
| Outlet & Switch Installation | GFCI outlet installation, USB outlet installation, Dimmer switch installation, Standard outlet and switch replacement | Homeowners upgrading interiors or landlords bringing rental units up to code | GFCI protection is code-required in kitchens, bathrooms, garages, and outdoor areas, and older homes frequently lack it. |
| Wiring for Additions & Remodels | Electrical rough-in for new additions, Remodel wiring and circuit updates, Inspection-ready wiring at each stage, Load calculations for expanded spaces | Homeowners adding square footage or renovating existing rooms | Getting the electrical rough-in right from the start means the project passes inspections at each stage without delays. |
| Backup Generator Installation | Transfer switch installation, Standby generator wiring, Whole-home generator hookup, Generator circuit setup | Homeowners and businesses that need power during outages | A proper transfer switch isolates your home from the utility grid before the generator connects, which is both a safety requirement and a code requirement in Georgia. |
| Electrical Safety Inspections | Pre-purchase wiring inspections, Pre-renovation code checks, Rental unit inspections, Panel and outlet condition review | Homebuyers, landlords, and property managers | An inspection before closing or before a renovation starts gives you a clear picture of the wiring before you commit to the next step. |
| EV Charger Installation | Level 2 charger circuit installation, 240-volt outlet for EV charging, Panel capacity check, Commercial EV circuit installation | Homeowners and businesses adding electric vehicle charging | A Level 2 charger runs on a dedicated 240-volt circuit. We check panel capacity first and handle any upgrade needed before running the circuit to your garage or driveway. |
Every situation is a little different, so call us at (943) 292-6289 and we will walk through what the work involves and what it will cost before anything is scheduled.
(943) 292-6289