When a builder finishes a phase and needs circuits signed off, or a property manager gets a call about a dead outlet in a unit, the next step is finding an electrician who can move on it without a long wait. Five Pines Electrical handles those calls across Alpharetta and the surrounding area, from straightforward fault repairs to full panel upgrades and new installation work. Work is carried out by licensed electricians, and the scope is priced before anything is scheduled.
Alpharetta draws a mix of newer construction and established residential neighborhoods, and the electrical work reflects that range. A recently built home might need a circuit added for a new appliance or an EV charger installed in the garage. An older property might need a panel that has simply run out of room for what the household is asking of it. Either way, the call starts the same way: you describe what is happening, and we take it from there.
Electrical work in an existing property rarely happens in a vacuum. The fittings, breakers, and wiring already in place shape what a repair or replacement involves. When a breaker fails in an older panel, the replacement has to match the panel's make and series. When an outlet is damaged in a room wired years ago, the box, the gauge of the wire, and the grounding arrangement all factor into what goes back in.
Some parts are straightforward to source. Others take longer, particularly for panels that are no longer in production or for older wiring configurations that require specific components. When something has to be ordered rather than fitted the same day, we say so on the call. You get a clear picture of the timeline before any work is scheduled, not after the electrician has already opened the wall.
Where aluminum branch-circuit wiring is present, the approach changes. Aluminum wiring requires compatible devices and proper connection methods to stay safe over time. We handle aluminum-wiring remediation and can walk you through what that involves for your property specifically.
A property built for one way of living does not always accommodate the next. An older home with a 100-amp panel was not designed for a household running a Level 2 EV charger, a home office, central air conditioning, and a modern kitchen at the same time. A garage conversion that becomes a workshop needs circuits the original wiring never anticipated. When a property is asked to carry more than it was wired for, the panel and the service entrance are where the answer starts.
We run a load calculation before recommending an upgrade. That tells us whether the existing panel can take on a new circuit with a breaker swap, or whether a full 200-amp service upgrade is the right move. If the service entrance or meter needs to come along with the panel, we include that in the scope. GFCI and AFCI protection is checked and updated as part of this work where code requires it.
The result is a system sized for what the property actually needs, not just what it needed when it was built. Call and we will get you back to full power.
Getting your power back is easier than you think, and arranging the visit should not be the hard part. We are available every day from 6:00 AM to 11:00 PM, and same-day service is often available when the situation will not wait. For planned work, appointments are set up on the call so you know when to expect someone and what the visit will cover.
When a tenant is in the property, or a business needs to stay open while the work is done, we work around that. The electrician arrives knowing what the job involves, which keeps the disruption as short as it needs to be. If a fault is found during the visit that was not part of the original call, we explain what it is and what addressing it would take before any additional work is started.
Every job gets treated like it matters, because it does.
Not every electrical call looks the same. A flickering light and a panel that keeps tripping under load are both electrical problems, but they call for different conversations. The service page carries the full breakdown of what each type of work involves. Here is how the main categories divide in practice.
Electrical problems don't wait, and neither do we, whether it is a dead outlet, a light that will not stay on, or a circuit that trips every time a specific appliance runs. A repair visit starts with a proper diagnosis. We trace the fault to its source rather than swapping parts until something works. GFCI outlet replacement, breaker repair, switch and dimmer installation, and wiring faults are all common calls. The situation that leads to each one is usually straightforward once the circuit is traced.
The situation here is a property that has outgrown what its electrical system was built for. Repeated breaker trips under normal load, lights dimming when large appliances kick on, or a fuse box that has run out of room are all signs the panel is the problem. We handle panel replacements, 200-amp service upgrades, subpanel installations, and service-entrance work. A load calculation comes first so the upgrade is sized correctly.
This category covers the work that comes before something new goes in. A new appliance, a ceiling fan in a room that was never wired for one, recessed lighting in a finished ceiling, or a dedicated circuit for a dryer or range all start with running the right circuit from the panel. The scope depends on what is already there and what the new load requires. We confirm the details on the call before anything is scheduled.
A whole-home surge protector installs at the panel and intercepts voltage spikes before they reach the wiring throughout the house. This region sees severe thunderstorms and the lightning that comes with them, and a spike that travels in through the utility line can damage appliances and electronics in a fraction of a second. A power strip covers what is plugged into it. Panel-level protection covers everything.
Installing recessed lighting in a finished ceiling involves more than the fixture itself. The circuit has to support the number of fixtures, the wiring has to reach each location, and the boxes have to be rated for the application. LED retrofits are often simpler, but the dimmer compatibility and the load on the existing circuit still need to be checked. We handle both new installations and retrofits, and we confirm what the existing wiring will support before we start.
A well pump runs on a dedicated circuit sized for its motor, and that circuit has to be protected and grounded correctly. Irrigation systems that run on a timer need their own supply as well. These are not complicated jobs, but they have to be done right. The wiring, the disconnect, and the overcurrent protection all have to match what the equipment requires.
These appliances run on 240-volt dedicated circuits, and the outlet type, wire gauge, and breaker size all have to match the appliance's specifications. When a kitchen is updated or a laundry room is moved, the existing circuit may not be in the right location or may not be sized for the new appliance. We run the circuit from the panel, install the correct outlet, and confirm the breaker matches before the job is done.
If you would rather read than call, our wiring guide has the detail.
The scope of the electrical work is priced before it starts. When you call, we ask about the property and the job so we can give you a rate that reflects what the work actually involves. A straightforward outlet repair is a different conversation from a panel upgrade with service-entrance work, and the price reflects that difference.
What can change a quote is what the diagnosis turns up. If a repair visit finds something that was not visible before the work started, we explain it and confirm the updated scope before continuing. You are not committed to additional work until you know what it covers and what it costs. The work carried out by licensed electricians is the same regardless of the job size, and clear communication from the first call to the final test is how every visit runs.
To get a quote on any electrical job in Alpharetta, call (943) 292-6289. The price is explained on the call, and you can ask what it covers and get a straight answer.
Alpharetta sits in Fulton County alongside a number of communities we cover regularly. Johns Creek, Roswell, Milton, Peachtree Corners, and Berkeley Lake are all part of the area we schedule calls in, along with the neighborhoods in between. If your address is outside Alpharetta proper, call and we will confirm coverage. We do not limit the service area to one zip code.
Fast turnaround. Fair pricing. Safe results.
Call us at (943) 292-6289 and describe what you are seeing. If the issue is related to work we completed, we want to know about it and we will work out how to address it. Describe what stopped working and when, and we will talk through whether it connects to the recent job or points to something separate.
We explain what we found, why the upgrade is needed, and what it involves before any additional work is scheduled. Nothing is added to the scope without your approval. If the original job can still be completed independently, we talk through whether to proceed with it as planned or address the service issue first.
Call (943) 292-6289 and describe what the tenant reported. We can usually give you a clear picture of what the visit will involve and what it will cost before anything is scheduled. Same-day service is often available for faults that cannot wait, and we work around tenants who need to remain in the property during the visit.
Yes. The electrical work in this area spans a wide range, from newer homes that need a circuit added or an EV charger installed to older properties where the panel or wiring has not been updated in decades. The approach changes depending on what is already there, and we confirm the scope on the call before scheduling anything.
We work with whatever access arrangement the property manager has in place. If a letting agent is coordinating entry, we confirm the details when the job is booked so the visit can proceed without delays. The person booking the job does not need to be present as long as access is arranged and someone with authority to approve the work has signed off on the scope.
Yes. Landlords and property managers with multiple units often schedule work across several addresses at once, and we handle those conversations the same way as any other call. Describe the properties and the work involved when you call (943) 292-6289 and we will work out a schedule that makes sense for the scope.
In many cases, yes. Panel work and service upgrades often require a temporary shutoff, but work on individual circuits can frequently be isolated so the rest of the property stays live. We plan the job with that in mind where it is practical and let you know in advance which circuits will be affected and for how long.
We work alongside contractors handling cabinetry, plumbing, and tile when the project requires it. The electrical rough-in typically happens before walls close, and the finish work, fixtures, outlets, and switches, comes in after surfaces are done. We confirm the sequence with whoever is managing the renovation so the electrical stages line up with the rest of the work.
Describing what you are seeing is enough. Five Pines Electrical is available every day from 6:00 AM to 11:00 PM, and same-day appointments are often available for calls that cannot wait. Licensed electricians. Code-compliant wiring. Fair rates.
Call (943) 292-6289 and tell us what is happening. We will handle the rest.
Everywhere else we go is in our service area. Close by, we also work in: Johns Creek, Roswell, Peachtree Corners, Duluth, Dunwoody.
From a tripped breaker to a full panel upgrade, we handle the electrical work that keeps homes and businesses in Alpharetta running safely. The rows below cover every service we offer, who each one fits best, and what is practical to know before you call. Work is carried out by licensed electricians, and the scope is priced before anything is scheduled. Browse what applies to your situation, then call us to talk through the details.
| Service Type | What's Included | Ideal For | Worth Knowing |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs, 240-volt and 220-volt outlet installation, Garage and workshop wiring, Basement circuit installation | Homeowners adding capacity or setting up a dedicated workspace | Every new circuit is sized for its intended load and connected at the panel with the correct breaker. |
| Whole-Home Surge Protection | Panel-level surge protector installation, Whole-house voltage spike protection, Protection for appliances and electronics, Surge protection for HVAC circuits | Homeowners in storm-prone areas or anyone with sensitive electronics | Fulton County sees active summer storm seasons with frequent lightning. A panel-mounted surge protector covers the entire home, not just the outlets with a strip plugged in. |
| Older-Home Rewiring | Aluminum wiring remediation, Knob-and-tube removal and replacement, Whole-home rewiring, Grounding and bonding upgrades | Owners of pre-1980 homes with outdated or unsafe wiring | Aluminum branch-circuit wiring and knob-and-tube systems were not built for modern electrical loads. A rewire brings the home up to current code and removes the safety risks that come with outdated wiring. |
| Dedicated Appliance Circuits | Dryer and range outlet installation, Refrigerator and dishwasher circuits, Microwave and washer circuits, Load calculations for new appliances | Kitchens and laundry rooms getting new or upgraded appliances | Running a high-draw appliance on a shared circuit is a common cause of repeated breaker trips. A dedicated circuit fixes that at the source. |
| Basement & Sump-Pump Circuits | Basement outlet and lighting circuits, Dedicated sump pump circuit, GFCI protection in below-grade spaces, Basement workshop wiring | Homeowners finishing a basement or protecting against water damage | A sump pump on a shared circuit is a risk during a storm outage. A dedicated circuit with proper GFCI protection is the right setup for below-grade equipment. |
| Electrical Panel & Service Upgrades | 200-amp service upgrades, Subpanel installation, Panel replacement, Meter and service entrance upgrades | Older homes with undersized panels or anyone adding significant electrical load | A 100-amp panel that worked fine decades ago often cannot keep up with today's appliances, EV chargers, and home office equipment. A 200-amp upgrade resolves the capacity problem and supports what you actually need. |
| Breaker & Fuse Repair | Breaker replacement, AFCI and arc-fault breaker installation, Fuse box troubleshooting, Breaker panel repairs | Homes with breakers that trip repeatedly or fail to reset | A breaker that keeps tripping under normal load is often a sign of an undersized circuit or a failing breaker, not just a nuisance. |
| Electrical Repairs & Troubleshooting | Dead outlets and switches, Flickering or dimming lights, Tripping breakers, Circuit diagnosis | Homeowners and tenants dealing with an immediate electrical problem | A proper diagnosis comes first so you know exactly what the repair involves before any work begins. |
| Lighting Installation | Recessed and LED lighting, Pendant and chandelier installation, Under-cabinet lighting, Exterior and security lighting | Homeowners remodeling or anyone replacing outdated fixtures | We handle the wiring and the fixture, so the job is complete in one visit rather than requiring a separate electrician follow-up. |
| Ceiling Fan Installation | New fan installation, Wiring a new ceiling location, Fan control and switch setup, Fan replacement | Homeowners adding comfort or replacing an old fan | If there is no existing wiring at the ceiling location, we run the circuit and install the correct box before mounting the fan. |
| Outlet & Switch Installation | GFCI outlet installation, USB outlet installation, Dimmer switch installation, Standard outlet and switch replacement | Homeowners upgrading interiors or landlords bringing rental units up to code | GFCI protection is code-required in kitchens, bathrooms, garages, and outdoor areas, and older homes frequently lack it. |
| Wiring for Additions & Remodels | Electrical rough-in for new additions, Remodel wiring and circuit updates, Inspection-ready wiring at each stage, Load calculations for expanded spaces | Homeowners adding square footage or renovating existing rooms | Getting the electrical rough-in right from the start means the project passes inspections at each stage without delays. |
| Backup Generator Installation | Transfer switch installation, Standby generator wiring, Whole-home generator hookup, Generator circuit setup | Homeowners and businesses that need power during outages | A proper transfer switch isolates your home from the utility grid before the generator connects, which is both a safety requirement and a code requirement in Georgia. |
| Electrical Safety Inspections | Pre-purchase wiring inspections, Pre-renovation code checks, Rental unit inspections, Panel and outlet condition review | Homebuyers, landlords, and property managers | An inspection before closing or before a renovation starts gives you a clear picture of the wiring before you commit to the next step. |
| EV Charger Installation | Level 2 charger circuit installation, 240-volt outlet for EV charging, Panel capacity check, Commercial EV circuit installation | Homeowners and businesses adding electric vehicle charging | A Level 2 charger runs on a dedicated 240-volt circuit. We check panel capacity first and handle any upgrade needed before running the circuit to your garage or driveway. |
Every situation is a little different, so call us at (943) 292-6289 and we will walk through what the work involves and what it will cost before anything is scheduled.
(943) 292-6289