When a dead outlet stops working or a breaker starts tripping every time the dryer runs, the fix starts with a call. We handle electrical repairs, panel work, wiring, lighting, and installations for homes and rental properties throughout Lilburn. From a single outlet that needs replacing to a complete service upgrade, the job gets scoped on the phone before anyone is scheduled, and you get the price before we arrive. We are available every day from 7:30 AM to 11:00 PM.
Call (943) 292-6289 to get started.
Lilburn is a town with a real mix of housing, and the electrical work reflects that. Older homes on the original wiring sit alongside newer construction, and both generate calls. A house that has been added onto over the years, a garage that got converted without a permit, a kitchen that has never had GFCI protection where it needs it: those are the situations we see regularly. We handle all of it, from a quick diagnostic to work that runs across several circuits. The scope is always settled on the call.
Some electrical problems are easy to put off. A light that flickers occasionally, an outlet that stopped working in a room you rarely use: those feel manageable. Others are not. A breaker that will not stay reset, an outlet that is warm to the touch, or a burning smell near a panel are situations where waiting makes things worse. We take short-notice calls when the schedule has room, and we confirm what is available when you phone.
For rental properties, we know that the timing matters beyond just the repair itself. A vacant unit needs to be turned over. A tenant cannot be without power in a bathroom or kitchen. We work around those constraints when they come up, and the schedule is discussed on the call so you know what to expect before we book anything.
For businesses that need to stay open, the same logic applies. We confirm the scope and the timing up front so the work fits around the operation rather than shutting it down.
Whatever the situation, the process starts with a phone call to (943) 292-6289, and the rest is worked out from there.
Electrical pricing moves with the job, and the job is not fully knowable until it is scoped. A quote for a ceiling fan installation in a room with an existing rated box is a straightforward conversation. A quote for a panel upgrade on a home where the service entrance has not been touched in decades involves more variables: what the panel currently feeds, whether the meter base needs attention, and what the utility requires on their side of the connection.
The things that move a quote are real and worth understanding. What the fault turns out to be once we open it up. Whether the existing wiring can carry the change being made, or whether a circuit needs to be run from scratch. Whether a panel has the capacity for a new load, or whether capacity is the actual problem. We go through those questions on the call, and you get the rate for the specific job before anything is scheduled.
You get a straight answer about the work before it is scheduled. There are no figures invented on this page, because the price belongs to the job, not to a category. Most of what comes up before a visit is answered on the services page.
Call (943) 292-6289 and we will work through what the job involves and what it costs.
A smart switch or a dimmer sounds like a small job, and often it is. The complication comes when the existing wiring does not include a neutral wire, which older switches frequently lack. We check what is in the box before quoting the work, because the answer changes what the installation involves. Done correctly, a dimmer or a smart switch is a straightforward swap. Done without checking, it is a return visit.
Knob-and-tube wiring was built for a different era of electrical load. It has no ground wire, it does not tolerate insulation being packed around it, and it was never rated for the circuits a modern home runs. Homes in Lilburn that still carry it are not necessarily unsafe on day one, but the risk grows as the wiring ages and the load on it increases. Replacement is done circuit by circuit or as a whole-home rewire, depending on what the inspection turns up and what the homeowner needs. AFCI and GFCI protection is part of the conversation when new circuits are run.
A panel-level surge protector intercepts voltage spikes at the service entrance before they reach the wiring inside the home. In a region where severe thunderstorms and lightning are a regular part of the season, that protection covers every circuit at once: appliances, electronics, EV charger circuits, and the wiring feeding heating and cooling equipment. It does not replace individual surge strips for sensitive devices, but it handles the large transient events that strips are not rated to absorb on their own. Grounding and bonding are checked as part of the installation, because the protector is only as effective as the ground path behind it.
A ceiling fan installation is simple when there is already a box rated for a fan in the ceiling. It is a different job when there is only a light fixture box, which is not rated for the dynamic load a fan puts on it. We check the box before the fan goes up, and if a new rated box needs to be installed, that is part of the quote. For replacements, we confirm the wiring matches what the new fan requires, including whether a neutral is present for models that need one.
The electrical side of a generator installation is the transfer switch: the component that isolates the home from the utility line when the generator is running. Without it, a generator connected directly to the panel creates a backfeed hazard for anyone working on the lines outside. We install the transfer switch, run the dedicated circuit between the switch and the panel, and confirm the panel has the capacity to carry the generator's output. The generator unit itself is outside what we handle. We work on the connection and the panel side only, and the work is done to the standard the utility and the local inspector expect.
Good electrical work isn't complicated, it's just done right, and lighting is where that shows up most clearly for a homeowner. The question we hear most often is whether recessed lighting is worth the effort. The honest answer is that it depends on what is already in the ceiling and how much of the room the existing fixtures actually cover. Recessed LED retrofits are a practical upgrade in rooms where a single ceiling fixture leaves the corners dark. We confirm what the ceiling can accommodate before anything is cut.
Kitchen and bathroom lighting come up constantly, and both have a code component: GFCI protection is required near water, and the wiring for new fixtures has to be run correctly to pass inspection. Under-cabinet lighting in a kitchen is worth doing at the same time as other kitchen work, because the walls are already open. Dimmer-compatible LED fixtures are worth specifying from the start rather than retrofitting later.
Exterior lighting for driveways, porches, and side entries is work we do regularly. Motion sensor lights and security lighting are straightforward installations when there is existing exterior wiring to work from. When there is not, a new circuit is part of the job. Outdoor GFCI outlets are required in certain locations by code, and we check those as part of any exterior lighting installation.
When a job is finished, we test every circuit, outlet, and device involved before we leave. For panel work, that means verifying that breakers are seated correctly, that the load is distributed as it should be, and that the panel is closed and labeled so the next person who opens it can read it. Labeling matters more than it sounds. A panel that nobody can read is a panel that gets guessed at, and guessing at a panel is how circuits get overloaded.
For outlet and lighting work, each device is tested before we pack up. For larger jobs, the written record of what was done, what circuits were added or replaced, and what code corrections were made is the document that matters when the property changes hands or a permit inspection is scheduled. A clean inspection report starts with work that was done correctly and documented. Panel and wiring work finished to code means that record holds up when it needs to.
We cover Lilburn and the communities around it. If you are in Mountain Park, Tucker, Norcross, Stone Mountain, or Berkeley Lake, the process is the same: call, scope the job on the phone, confirm the schedule, and get the price before anything is booked. Gwinnett County is familiar ground, and the work gets done to the code inspectors here actually enforce.
If your address is nearby but not on that list, call anyway. We confirm coverage when you reach us, and most of the surrounding area falls within what we handle regularly.
A detached garage needs its own circuit or subpanel fed from the main panel in the house. The feed is typically run underground in conduit, and the depth and routing depend on the layout of the property. We scope the run, the subpanel size if one is needed, and the load the garage will carry before any trenching or conduit work begins.
In most cases, yes. Panel-level surge protection is a straightforward addition when the panel is already open for another job, and it covers every circuit in the home from that point forward. The region's storm season makes it a practical investment rather than an optional one, and combining it with other panel work avoids a separate visit later.
Unpermitted work is a common finding, particularly in older homes and in homes that have changed hands multiple times. What can be done depends on the nature of the work and what the local inspection authority requires. We assess what is there, explain the options, and confirm the scope of any corrective work before anything is scheduled.
Yes. Both draw enough current that sharing a circuit with other equipment is not practical and will trip breakers repeatedly. A welder typically requires a 240V dedicated circuit, and a large compressor often does as well. We confirm the equipment's specifications on the call and size the circuit to match.
Outdoor wiring that runs between structures is required to be buried or run in conduit to protect it from damage and weather. The method depends on the distance, the load, and what is practical given the property layout. We confirm the approach on the call and explain the routing before work starts.
Homes from that era often have aluminum branch-circuit wiring, which behaves differently from copper and needs specific devices and connections to stay safe as it ages. The panel is the other priority: a fuse box or a panel that has not been evaluated in years may not have the capacity the home actually needs today. A wiring inspection is a practical starting point before any renovation work or major appliance addition, and we go through what it involves on the call.
We can scope the specific circuit and panel capacity for the appliance in question without conducting a full inspection. If the question is whether a dedicated circuit exists and whether the panel can carry the load, that is a targeted assessment rather than a whole-property review. We confirm the scope on the call.
Yes. Mountain Park, Tucker, and the other communities around Lilburn are all within the area we cover. The process is the same regardless of which town the property is in: the job is scoped on the call, the price is confirmed before we schedule, and the work is done to the same standard.
Call (943) 292-6289 and we will confirm coverage for your address.
Electrical problems do not improve with time. A breaker that trips once a week will trip more often. A loose connection that causes a flicker can develop into an arc-fault condition. The outlet you stopped using because it felt warm is still a problem, even unused.
Call (943) 292-6289 and we will scope the job, give you the price, and get it on the schedule.
We are available every day from 7:30 AM to 11:00 PM. Pick up the phone. Get a straight answer. That is how we work.
Other towns where we take electrical work: Mountain Park, Tucker, Norcross, Doraville.
We handle the full range of electrical work for Lilburn homeowners, landlords, and businesses, from a single outlet repair to a complete service upgrade. Every job starts with a call where we scope the work, explain what it involves, and give you a price before anything is scheduled. The rows below cover what each service includes, who it fits best, and what is useful to know going in.
Call (943) 292-6289 to get started.
| Electrical Service | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades | Load calculation and service sizingPanel replacement and breaker installationService-entrance and meter coordinationSubpanel installation for garages and workshops | Homes with a 100-amp service, a full panel, or breakers that trip under normal load | A panel upgrade typically requires utility coordination for the meter side of the job. We handle the permit and inspection process as part of the work. |
| Backup Generator Installation | Transfer switch installationDedicated generator circuitPanel connection and load confirmationUtility isolation setup | Gwinnett County homeowners who want reliable power through the area's storm season | The transfer switch is the critical piece. It isolates the home from the utility line when the generator is running, protecting equipment and utility workers alike. We handle the electrical connection side only. |
| Electrical Repairs & Troubleshooting | Dead outlets and failed switchesArc-fault and ground-fault diagnosticsLoose or damaged wiring connectionsBurning smells and sparking devices | Any homeowner or property manager dealing with a wiring symptom that needs a clear answer | Warm outlets, buzzing switches, and repeated breaker trips all point to specific faults. We trace the problem before replacing anything. |
Call (943) 292-6289 to go over the job, get a price, and find out what the visit covers before anything is scheduled.
(943) 292-6289