Electrical problems in a home or commercial space rarely announce themselves at a convenient moment. A breaker trips, an outlet stops working, or a panel that has been running fine for years suddenly cannot keep up with the load. Most people try the obvious things first: reset the breaker, check the GFCI, swap the device. At some point the problem either comes back or turns out to be something that needs more than a reset. That is where we come in.
We handle electrical work for properties throughout Doraville, from single-family homes to rental units, small commercial spaces, and the kind of mixed-use buildings that a town this size tends to have. Repairs, panel work, lighting, dedicated circuits, surge protection, and wiring for additions are all part of what we do. We are available every day from 7:30 AM to 11:00 PM.
Call (943) 292-6289 for a quote before anything is scheduled.
Good electrical work isn't complicated, it's just done right, and that starts with reading the situation accurately before any work begins. A dead outlet in an older Doraville home might trace back to a tripped GFCI in another room, a loose connection inside the box, or a wiring fault on a circuit that has been showing signs for a while. The same symptom can have three different causes, and the fix depends on which one it is.
We work through the diagnosis before we quote the repair. That means checking what the panel is doing, testing the affected circuits, and looking at how the wiring is laid out before anything is opened up. Work in this area gets done to the code inspectors here actually enforce, which matters when a repair involves GFCI or AFCI protection, grounding, or anything that will be looked at on a future inspection.
A detached garage or workshop that needs its own panel is one of the more common calls we get from residential properties. Running a subpanel from the main service means the outbuilding gets its own breakers, its own capacity, and a clean separation from the circuits in the house. For workshop equipment like welders and air compressors, the circuit sizing matters. A welder running on an undersized circuit will trip the breaker under load. We calculate what the equipment actually draws and wire the circuit to match.
Indoor lighting work covers everything from a single fixture swap to a full recessed LED retrofit across several rooms. Ceiling fan installation is part of this, including runs where there is no existing ceiling box rated for a fan. Recessed lighting in a finished ceiling involves more than the fixture itself: the wiring path, the box location, and whether the existing circuit can carry the added load all factor in before the first hole is cut.
A panel-level surge protector intercepts voltage spikes at the service entrance before they reach the wiring inside the building. In a region where severe thunderstorms are a regular part of the year, that protection covers appliances, electronics, and any sensitive equipment on the circuits. Grounding and bonding are part of the installation, because a surge protector is only as effective as the ground path behind it. We check both when the work is done.
An unlabeled or mislabeled panel is a practical problem every time work needs to be done. We identify each circuit, confirm what it feeds, and label the panel accurately. For older properties where circuits have been added over time without documentation, this is often the first step before any other work proceeds. It also matters for safety: knowing which breaker controls which circuit is not a detail, it is the starting point for working on anything safely.
A well pump needs a dedicated circuit sized for the motor's starting and running current. An irrigation system controller needs its own protected circuit. Large appliances, dryers, ranges, and similar equipment all belong on dedicated circuits rather than sharing a run with other loads. We handle the circuit sizing, the wiring, and the connection at the panel for all of these.
Older homes in DeKalb County sometimes still have aluminum branch-circuit wiring, which behaves differently from copper under load and at connections. Remediation involves addressing the connection points, installing the right devices, and confirming the circuits are operating safely. Arc-fault and ground-fault breakers are part of the code-correction picture for bedrooms, living spaces, kitchens, and bathrooms. We handle electrical inspection and code correction as standalone work or as part of a larger project.
Electrical work like this comes up more than people expect on short notice. We take short-notice calls and can often fit urgent work in when the schedule allows. When you call, we go through what is happening, ask the questions that help us scope the job, and confirm what is available. You get a clear answer on timing rather than an open-ended window.
For rental properties and commercial spaces that need to stay occupied or operational, we work around the situation. Tenant access, business hours, and the need to keep certain circuits live while others are worked on are all things we talk through on the call before the visit is scheduled. We protect your floors and finishes while we work, and the space is left clean when the job is done.
Renovations and additions involve more than one trade, and the order matters. Electrical rough-in has to happen before insulation and drywall. If the electrician is scheduled after the walls are closed, the wiring has to go in through finished surfaces, which adds time and cost to a job that could have been straightforward.
On the front end, the panel needs to be assessed before the renovation scope is finalized. An addition that adds square footage and new circuits may push the service past what the existing panel can carry. Finding that out before demolition starts is a different situation from finding it out when the inspector arrives.
We work with general contractors and property owners on the sequencing. The call before the project starts is the one that keeps the electrical from becoming the bottleneck. The specifics for a job like this are on the full list of electrical services.
The honest answer is that it depends on what the job actually involves, and that cannot be settled without knowing the specifics. A ceiling fan installation in a room with an existing rated box is a different scope from one that needs a circuit run from the panel. A panel upgrade on a service with room to work is a different job from one that needs a service-entrance replacement.
What moves a quote are three things: what the fault or installation turns out to be once we look at it, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change. We go through those questions on the call. You get the rate before anything is scheduled, and the scope is explained so you know what the visit covers.
Pricing is straightforward. Ask what the price covers when you call and you get a direct answer. Nothing is added to the scope without your approval.
Call (943) 292-6289 and we will work through what the job involves before anything is booked.
Dealing with a tripping breaker or a dead outlet is one kind of call. A different kind comes when a property is being asked to carry a load it was never wired for. An EV charger, a large workshop circuit, a home addition, or a new HVAC unit all add demand to a service that may already be near its limit.
The first step is a load calculation. That tells us what the panel is currently carrying, what the new load will add, and whether the service has the capacity to handle both. A 100-amp service in a home that has grown over time is often already close to its limit before a new circuit is added.
If the panel cannot carry the added load, the panel upgrade happens before the new circuit is run. A 200-amp service upgrade replaces the panel, the main breaker, and coordinates with the utility for the meter side of the work. Subpanel installation is part of this conversation when the new load is in a separate structure. We confirm what the installation will involve on the call and give you the rate before anything is scheduled. Call us and the rest is handled.
We cover Doraville and the surrounding area throughout DeKalb County, including Chamblee, Brookhaven, Dunwoody, Norcross, and Peachtree Corners. If your address is in or near any of these communities, call and we will confirm coverage for your location.
Often yes. Targeted repairs, circuit additions, and safety upgrades can be done on an older property without rewiring the whole house. Whether a full rewire is the right answer depends on the condition of the existing wiring, the load the property needs to carry, and what the inspection or sale requires. We assess what is there before recommending a scope.
Most significant electrical work, including panel upgrades, new circuits, and wiring for additions, requires a permit and inspection through the local authority. The permit process and what it covers depend on the scope of the job and whether the work is on private property or affects the service entrance. We confirm what applies to your job before anything is scheduled and handle the permit coordination as part of the work.
Yes. We work around occupied spaces and operating businesses regularly. The approach depends on which circuits need to be taken down and for how long. We talk through the access and timing on the call before the visit is booked, so the work fits the schedule of the property rather than the other way around. Short-notice calls are welcome, and the schedule is confirmed when you call.
Older properties in Doraville often have panels that were sized for a smaller electrical load than the home now carries, aluminum branch-circuit wiring that needs remediation at connection points, and circuits without arc-fault or ground-fault protection. Unlabeled panels and undocumented circuit additions from past renovations are also common. An electrical inspection is a practical starting point for understanding what a property actually has before any other work is planned.
A flickering light and a full rewire start the same way: a call, a clear scope, and a rate confirmed before anything is scheduled. Whether the job is a single outlet or a panel replacement, Lawrenceville Electrical Company works the same way on every call. Pick up the phone. Get a straight answer. That is how we work.
Call (943) 292-6289 and know what the visit covers before we arrive.
Electrical work in the surrounding towns: Norcross, Tucker, Clarkston.
We handle the full range of electrical work for Doraville homeowners, landlords, and businesses, from a single outlet repair to a complete service upgrade. Every job starts with a call where we scope the work, explain what it involves, and give you a price before anything is scheduled. The rows below cover what each service includes, who it fits best, and what is useful to know going in.
Call (943) 292-6289 to get started.
| Electrical Service | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Ceiling Fan Installation | Fan mounting and wiringCeiling box upgrade for fan-rated supportSwitch and remote wiringReplacement of existing fans | Any room where a fan is being added or replaced, including locations without an existing fan-rated ceiling box | A standard light fixture box is not rated to support a ceiling fan. We upgrade the box when needed before the fan goes up. |
| Electrical Panel & Service Upgrades | Load calculation and service sizingPanel replacement and breaker installationService-entrance and meter coordinationSubpanel installation for garages and workshops | Homes with a 100-amp service, a full panel, or breakers that trip under normal load | A panel upgrade typically requires utility coordination for the meter side of the job. We handle the permit and inspection process as part of the work. |
| Whole-Home Surge Protection | Panel-mounted surge device installationGrounding and bonding checkProtection for all home circuitsCoordination with EV charger and appliance circuits | Any Doraville home exposed to lightning and utility voltage spikes, especially those with sensitive electronics or EV chargers | A panel-level surge protector intercepts large transient events that individual power strips are not rated to handle. It covers every circuit in the house. |
Call (943) 292-6289 to go over the job, get a price, and find out what the visit covers before anything is scheduled.
(943) 292-6289