A record of the electrical work done on a property is worth more than most people realize until the moment they need it. When a home in Stonecrest changes hands, gets rented again, or goes through an insurance review, a clear history of what was upgraded, what was inspected, and what was brought to code can settle questions before they become problems. We handle that work for property owners, investors, and businesses across DeKalb County, and we document it the way a future inspection expects to find it.
Homes in this area were wired in different decades, and it shows in the panels. A city of Stonecrest's size carries a real mix of housing: some of it relatively recent, some of it older and running on wiring that was installed long before the loads a modern household puts on it. We work across that range, from a single outlet replacement to a full service upgrade, and every job gets done to the code inspectors here enforce.
Call (943) 292-6289 to get a quote before anything is scheduled.
The gap between tenants is the most practical window for electrical work that would otherwise require working around someone's schedule, their furniture, and their daily routine. A vacant unit allows access to every room, every panel, and every circuit without coordinating around a household. Work that would take two visits in an occupied property often gets done in one.
That includes outlet replacements throughout the unit, GFCI and AFCI upgrades in kitchens and bathrooms, lighting swaps, and a panel check before the next tenant signs a lease. It also includes smoke and carbon monoxide alarm replacement, which is far easier when the unit is empty and the detectors can be tested properly without disrupting anyone. If the access situation needs coordination, we work that out on the call. The scope and the price are confirmed before we schedule, so there are no open questions when the visit happens.
A panel check before a new tenancy is a reasonable step in any older DeKalb County property. If the panel has outdated breakers, limited capacity, or labeling that does not match the circuits it controls, those are things worth knowing before a tenant moves in rather than after. We confirm what the panel is actually doing, identify any gaps, and give you a clear answer on whether an upgrade makes sense or whether the existing service is adequate for the load.
Hardwired smoke and carbon monoxide alarms are not a job that gets easier when someone is living in the unit. A vacant property allows us to replace every alarm on the same visit, test each one, and confirm the interconnect is working the way it should. If the wiring behind the existing alarms is outdated or improperly run, we address that at the same time.
Scheduling starts on the call. We go through what the situation is, what the symptom looks like, and what the property needs, and from there we confirm what the schedule allows. For work that can wait, we find a window that fits. For a problem that will not keep, like a dead circuit, a sparking outlet, or a panel that is behaving unexpectedly, we take short-notice calls when the schedule has room.
For tenants who cannot leave and businesses that have to stay open, we work around what is in place. That means planning the sequence of the job so that the circuits being worked on are the ones that can be taken offline without shutting down everything else. The scope of that kind of job is worth discussing on the call before we arrive, so the visit goes the way both sides expect. We are available every day from 7:30 AM to 11:00 PM, including weekends.
Lighting is one of the more visible parts of an electrical job, and it is also the part that gets deferred longest. An interior room running on an original ceiling fixture from decades ago is not getting the light the space could have. Recessed LED retrofits change the character of a room without a major renovation, and they draw less current than the fixtures they replace. That matters in older homes where the circuits are already carrying a reasonable load.
Outside, motion-sensor lighting and driveway fixtures do two things at once: they improve visibility and they change the way a property reads at night. A dark exterior is not just a comfort issue. It is a practical one for anyone arriving after dark, whether that is a tenant, a visitor, or the property owner. Good electrical work isn't complicated, it's just done right, and exterior lighting is a job worth doing at the same time as other work on the property rather than as a separate call later.
Ceiling fan installation and lighting work pair naturally. If a room is getting a new fixture or a recessed retrofit, adding a fan on the same visit is more efficient than scheduling it separately. We confirm whether the existing ceiling box is rated for a fan before anything is installed. If it is not, we address the box as part of the job.
Under-cabinet lighting in a kitchen is another job that comes up alongside other electrical work. It runs off a dedicated circuit or ties into an existing one depending on the load, and the wiring is cleaner when it is planned rather than added later. We cover both during the call. Anybody planning ahead in Stonecrest can start with the page that lists our electrical services.
Electrical work like this comes up more than people expect: a single outlet that has not worked since the property was purchased, an exterior light that nobody has gotten around to, a switch that sparks slightly when it is flipped. These are jobs that get pushed down the list because they seem minor. They are not always minor.
An outlet that has never worked points to a wiring fault, a failed device, or a tripped GFCI upstream that nobody found. A switch that sparks on contact may have a loose connection or a worn device that is drawing an arc. An exterior light that has been ignored may have a wiring issue at the junction box that weather has been working on for years. The longer these sit, the more they become part of the background of the property rather than things that get fixed. A call is the faster path. We scope the job on the phone, confirm the price, and handle it on the visit.
The rate depends on what the work turns out to be, and that is not something that can be settled before we know the specifics. What moves a quote in one direction or another is what the fault actually is once it is traced, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without additional work. A straightforward outlet replacement is a different scope from one where the wiring behind it needs attention.
When you call, we go through the situation, ask the questions that matter, and give you the rate for that job before anything is scheduled. Ask what the price covers and you get a direct answer. If something changes once we are on site, we tell you before any additional work starts. Nothing is added to the scope without your approval. Pick up the phone. Get a straight answer. That is how we work.
A panel that is running out of capacity shows itself in a few ways: breakers that trip under normal load, no open slots for new circuits, or an older service that simply was not sized for what the home draws now. Panel replacement starts with a load calculation to confirm what the new service needs to carry. From there, we handle the panel itself, the breaker configuration, and the coordination with the utility for the meter side of the job. A panel upgrade is also the right time to add arc-fault and ground-fault breaker protection where the existing panel did not have it.
Hardwired alarms are interconnected, which means when one detects something, every alarm in the house responds. That matters in a property with multiple floors or a layout where a bedroom is far from the kitchen. Replacing battery-only alarms with hardwired units, or replacing aging hardwired alarms that are past their service life, is a job that takes less time than most people expect and produces a result that holds up.
Aluminum branch-circuit wiring was used in residential construction during a specific period, and properties in DeKalb County that were built during those years may still have it. The issue is not the aluminum itself but how it behaves over time at connection points, where it can loosen and create heat. Remediation involves addressing those connection points with the correct materials and methods, and in some cases replacing the branch circuits where the condition warrants it. We assess the scope on the visit and explain what the remediation involves before any work starts.
A full rewire replaces the branch-circuit wiring throughout the home and brings everything up to current code. A partial rewire addresses the areas where the existing wiring is the problem, whether that is knob-and-tube replacement in an older section of the home, aluminum-circuit replacement in a specific area, or new wiring for an addition. Either way, the job starts with a clear picture of what is in place and what the finished wiring needs to accomplish. Panel and wiring work finished to code is the standard we work to, because that is what holds up when the property is inspected.
We cover Stonecrest and the communities around it throughout DeKalb County. If you are in Lithonia, Redan, Lakeview Estates, Panthersville, or Candler-McAfee, we cover those too. Call and we confirm service availability for your address when you reach us.
Yes, where the scope allows it. A panel upgrade and a whole-home rewire, for example, can be staged so the panel is done first and the rewire follows. We go through the sequencing on the call and confirm what each stage involves and when it needs to happen relative to the others.
Yes. We can assess what has been done, identify what remains, and complete the work to the correct standard. We go through the existing work before picking up where it left off, because taking on someone else's rough-in without checking it first is not something we do.
Yes. The panel should be reachable and not blocked by furniture, storage, or other equipment. We need to open the panel, check the breakers, and work inside it safely. If the panel is in a tight location, let us know on the call so we can plan accordingly.
A transfer switch is the required solution. It isolates the home's electrical system from the utility before the generator is connected, which prevents back-feeding. We install the transfer switch as part of any generator hookup, and we do not connect a generator directly to a panel without one.
Access arrangements are confirmed on the call before the visit is booked. If a key needs to be left somewhere or collected beforehand, we work out the details at that point so the visit proceeds without delay. The access plan is confirmed before we schedule the appointment.
Yes. We work throughout Stonecrest and the surrounding area, including Lithonia, Redan, Lakeview Estates, Panthersville, and Candler-McAfee. When you call, we confirm service availability for your specific address and go through the job from there.
The most common calls involve outlets that have stopped working, GFCI protection that was never installed or has failed, lighting fixtures that need replacement, and panels that have not been checked in years. Hardwired smoke and carbon monoxide alarm replacement is also a frequent request during vacancy periods. These are all jobs that are easier to handle when the unit is empty, and we can often cover several of them in a single visit if the scope is worked out on the call beforehand.
From repairs and panel upgrades to rewiring, EV charger circuits, generator hookups, and surge protection, we handle the full range of residential and commercial electrical work in Stonecrest and across DeKalb County. We are available every day from 7:30 AM to 11:00 PM. If you are in Lithonia, Redan, or anywhere nearby, the call reaches the same place.
Reach out to Lawrenceville Electrical Company at (943) 292-6289 and get a price before anything is scheduled.
Other towns where we take electrical work: Redan, Conyers, Decatur.
We handle the full range of electrical work for Stonecrest homeowners, landlords, and businesses, from a single outlet repair to a complete service upgrade. Every job starts with a call where we scope the work, explain what it involves, and give you a price before anything is scheduled. The rows below cover what each service includes, who it fits best, and what is useful to know going in.
Call (943) 292-6289 to get started.
| Electrical Service | What It Covers | Best For | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service Upgrades | Load calculation and service sizingPanel replacement and breaker installationService-entrance and meter coordinationSubpanel installation for garages and workshops | Homes with a 100-amp service, a full panel, or breakers that trip under normal load | A panel upgrade typically requires utility coordination for the meter side of the job. We handle the permit and inspection process as part of the work. |
| Backup Generator Installation | Transfer switch installationDedicated generator circuitPanel connection and load confirmationUtility isolation setup | DeKalb County homeowners who want reliable power through the area's storm season | The transfer switch is the critical piece. It isolates the home from the utility line when the generator is running, protecting equipment and utility workers alike. We handle the electrical connection side only. |
| Whole-Home Surge Protection | Panel-mounted surge device installationGrounding and bonding checkProtection for all home circuitsCoordination with EV charger and appliance circuits | Any Stonecrest home exposed to lightning and utility voltage spikes, especially those with sensitive electronics or EV chargers | A panel-level surge protector intercepts large transient events that individual power strips are not rated to handle. It covers every circuit in the house. |
Call (943) 292-6289 to go over the job, get a price, and find out what the visit covers before anything is scheduled.
(943) 292-6289